第一作者韩鹏男，博士生，1991年生

通信作者张卫华男，教授，博士生导师，1961年生

邮箱：tpl@swjtu.edu.cn

轮对结构弯曲及型面磨耗对高速列车振动性能的影响

韩鹏，张卫华

(西南交通大学牵引动力国家重点实验室，成都610031)

摘要：高速列车服役过程中，轮对结构弯曲及高速列车服役中改变最大的轮对磨耗因素均会对车辆性能造成很大影响。考虑高速轮对的三阶弯曲模态的影响，根据某型高速动车组分别建立考虑不同轮对弯曲变形的动力学模型，依次分析轮对各阶弯曲模态在整个服役周期内不同磨耗状态下车辆稳定性及各向振动的变化，并得出如下结论。轮对一阶弯曲对车辆稳定性和振动性能影响最大，临界速度下降约10%，振动加速度上升明显，而二三阶弯曲对临界速度影响不大。通过不同工况下车辆整备频率的分析可知，考虑轮对一阶弯曲后，车辆整备频率的变化及轮对弯曲频率是造成上述变化的主要原因。

关键词：高速列车；服役周期；轮对磨耗；轮对弹性；振动加速度；时频分析

基金项目：国家自然科学基金委员会-铁道部高速铁路基础研究联合基金(U1234208)；2014年西南交通大学博士研究生创新基金。

收稿日期：2014-01-22修改稿收到日期：2014-04-03

中图分类号:U260.331文献标志码：A

Influences of structural bending deformation and profile wear of wheelsets on vibration performance of high-speed trains

HANPeng,ZHANGWei-hua(State key Laboratory of Traction Power，Southwest Jiaotong University, Chengdu 610031, China)

Abstract:Wheel wear and bending modes of wheelsets have great effects on vehicle performances. Dynamic models with three different bending modes of wheelsets were built separately based of inspection on the high-speed trains in service on Wu-Guang line. Vehicle stability and vibration performances were studied under different bending modes of wheelsets and in consideration of wheel wear being the biggest influential factor in service. It was concluded that the first-order bending mode has great influence on vehicle service performance while the second order and the third one can be almost neglected; the critical speed declines by about 10% if considering the elastic deformation of the first bending mode, the vertical acceleration of wheelsets grows obviously; the bending frequency of flexible wheelsets and the variation of the preparation frequency of the whole vehicle are the primary reasons of the vehicle performance declination.

Key words:high-speed train; service cycle; wheel wear; wheel flexibility; vibration acceleration; time-frequency analysis

轮对在车辆动力学中有着举足轻重的作用，这不仅体现在传统轮轨接触问题，还包括近年发展的轮对结构弹性问题。国内外学者就轮对弹性对车辆动力学的影响做了丰富研究，Popp[1-2]等较早考虑轮对弹性对车辆动力学的影响，并在时频域内对比刚性及弹性轮对动力学性能。……