无磷水稳剂在软水水质条件下的应用
2018-05-02马力
马力
【摘 要】论文采用模拟试验法评价了复配无磷水稳剂在软水系统中的缓蚀、阻垢性能,同时跟踪考察了该水稳剂在生产条件下的应用。结果表明,该无磷水稳剂配方在低硬度、低碱度的软水水质条件下能满足环保排放和缓蚀阻垢要求,并取得了优异的水处理效果。
【Abstract】In this paper, the corrosion inhibition and scale inhibition performance of the compound phosphorus free water stabilizer in soft water system was evaluated by simulation test method. The application of the water stabilizer in the production condition was also investigated. The results showed that the formulation of the phosphorus free water stabilizer was low in hardness and low alkalinity can meet the requirements of environmental protection emission and corrosion and scale inhibition, and achieve excellent water treatment effect.
【关键词】无磷;缓蚀阻垢;软水;应用
【Keywords】no phosphorus; corrosion and scale inhibition; soft water; application
【中图分类号】TQ085+.4 【文献标志码】A 【文章编号】1673-1069(2018)04-0144-02
1 引言
循环水水稳剂目前仍大量采用磷系配方,磷系配方具有价格便宜、效果好的优点,但排放易引起水体富营养化等环保问题,易引起菌藻类的大量增殖,为避免磷排放造成的环保问题,循环水处理药剂由传统的磷系配方逐渐被无磷环保配方替代。海南某炼化企业循环水系统补充水水质类型为南方典型的低硬度、低碱度软水水质,腐蚀倾向强,同时循环水系统供应用户均为高温高压的换热器,其运行热负荷高,换热器进出口温差大,因此在运行至一定浓缩倍率之后,水的结垢倾向会明显突出,要求无磷药剂配方的阻垢性能必须满足运行要求。
2 应用条件
2.1 系统参数
该系统为炼化企业用循环水厂,由5间逆流式机械通风冷却塔组成,系统总循环水量:20000m3/h,保有水量:7500m3,回水温度:36~40℃,给水温度:28~32℃,浓缩倍率:≥5.0,系统材质:碳钢、不锈钢、铜。
2.2 补充水水质
循环水系统补充水水源为经絮凝沉淀的水库水,受降雨、台风等环境因素影响,其水质随季节稍有变化,典型水质数据如下表1。
用稳定指数(Ryznar指数)判断该类型水质的倾向,该循环水补充水质稳定指数为9.564,判断为严重腐蚀型水质。……
