APP下载

城区110kV合建变电站变压器选型探讨

2016-10-21王俊杰杨怀栋常修猛

价值工程 2016年9期

王俊杰 杨怀栋 常修猛

摘要:根据城区110kV合建变电站的防火、防爆要求,提出SF6气体变压器、环氧树脂浇注干式变压器和交联电缆干式变压器是三种合适的变压器型式。通过技术特性的分析和比较,SF6气体变压器产品成熟程度和可靠性最高,目前宜作为城区110kV合建变电站变压器的首先。但从环境保护角度考虑,未来城区110kV合建变电站应重点考虑选用环氧树脂浇注干式变压器和交联电缆干式变压器。

Abstract: According to the fire and explosion protection requirements of the urban 110kV joint-construct transformer substation, three kinds of suitable transformer mode are put forward, they are SF6 gas insulated transformer, epikote teeming dry-type transformer and crosslinked cable dry-type transformer. Through the analysis and comparison of technical characteristics, the maturity and reliability of the product of SF6 gas insulated transformer are highest. It can be the first choice of the transformer in urban 110kV joint-construct transformer substation. But from the angle of environmental protection, the epikote teeming dry-type transformer and crosslinked cable dry-type transformer should be considered for the urban 110kV joint-construct transformer substation in the future.

關键词:合建变电站;气体变压器;环氧树脂干式变压器;交联电缆干式变压器;防火防爆

Key words: joint-construct transformer substation;gas insulated transformer;epikote dry-type transformer;crosslinked cable dry-type transformer;fire and explosion protection

中图分类号:TM411+.4 文献标识码:A 文章编号:1006-4311(2016)09-0232-03

0 引言

随着我国经济社会的不断发展,城市建设呈现了规模扩大、人口密集、高楼林立的显著特点,使得城市电网的供电面积越来越大、负荷密度不断提高。与此同时,同容量变电站的供电半径越来越小,使得高压电网必须深入城市中心才能满足供电要求。目前,北京、上海、广州等型大城市已经逐步建立了500kV输变电系统为外环、220kV输变电系统为纵横网络、110kV输变电系统为基本电能输送单元的三级高压输配电系统。110kV输变电系统深入城市各个角落,110kV变电站在城区内已呈星罗棋布的布置格局。

但是,城区110kV变电站的建设面临用地紧张、与城市周围建筑风格相协调、避免设备运行噪声对周围居民区或办公场所的正常活动造成影响等诸多外部条件限制。在这种情况下,110kV变电站采用全户内、地下布置、与商用建筑物混合建设的型式(又称为合建变电站)在工程建设实践中取得了良好效果,不仅起到了充分利用公共资源、节约占地、降低了工程造价的作用,而且还减少了变电站噪音对周围环境的影响,解决了与周围环境及建筑风格相协调的问题。……

登录APP查看全文