特低渗透油田膜处理技术应用分析
2012-06-04洪旭
洪旭
摘要:目前特低渗透油田注入水达到“5.1.1”指标基本采用超滤膜分离技术,本文介绍了超滤膜技术在油田生产现场应用现状,总结了水质处理效果、现场生产管理维护使用情况,分析了各种膜在清水及含油污水的适应性,摸索出了超滤膜在油田不同水质处理使用中的工艺参数,提出了在精细管理、过滤介质条件、膜污染控制等方面的认识和建议,为超滤膜技术在特低渗透油田注入水水质处理应用方面提供可借鉴性经验。
关键词:特低渗透;膜处理技术;应用分析
Abstract: This paper introduces the ultrafiltration technology in oilfield production and field application present situation, summarizes the results of water treatment, production management and maintenance use, analyzes the adaptability of various membranes in oily sewage water, fumble gave ultrafiltration membrane to water treatment in use in different process parameters, it is presented in the fine management, filter media conditions, membrane pollution control and other aspects of the understanding and the suggestion, UF membrane technology in low permeability oilfield injection water quality processing applications to provide referential experiences.
Key words: low permeability; membrane technology; application analysis
中图分类号:TE348文献标识码:A文章编号:2095-2104(2012)05-0020-02
一、超滤膜技术应用概况
我国某油田主要开发特低渗透油层,所属区块平均空气渗透率低于20×10-3μm2,按照要求此类油层的注水水质应达到“5.1.1”指标(含油量≤5mg/L、悬浮物固体含量≤1mg/L、悬浮物粒径中值≤1μm)。针对常规多层砂滤、纤维滤芯等精滤技术不能满足水质指标要求的情况,先后应用了过滤孔隙小、分离精度高的中空超滤膜过滤技术。
二、膜处理地下水应用情况
我国某油田地下水处理应用的超滤膜,安装在Ⅰ、Ⅱ、Ⅲ等3座水质站,主要采用聚偏氟乙烯(Ⅰ、Ⅱ)和磺化聚醚砜(Ⅲ)两种材质,超滤膜装置主要包括供水、膜组件、反冲洗、化学清洗、空气压缩、PLC自控等部分。工艺流程示意图如下。
1、聚偏氟乙烯膜应用情况及效果分析。(1)应用情况。该种材质膜在Ⅰ、Ⅱ水质站应用,处理工艺均为:水源井来水→锰砂过滤→精滤→超滤膜过滤→注水。(2)水质处理效果。Ⅱ水质站超滤膜进水悬浮物1.6mg/L,含铁量0.2mg/L;出水悬浮物0.6mg/L,粒径中值0.8μm,含铁量0.1mg/L。……
