APP下载

浅谈新能源纯电车型柔性生产的底盘合装方法

2023-07-13蒋常林刘桂永苏晓宇

时代汽车 2023年13期

蒋常林 刘桂永 苏晓宇

摘 要:文章简单介绍了汽车底盘整体合装的目的及当前现状,提出了一种适合各车型柔性生产的底盘合装方法。针对底盘整体合装有可能出现的主要问题做了说明,并且对各车型高柔性生产时出现的问题给出了相应的应对措施。文中提出了底盘整体合装的工艺需求内容,用于约束产品的设计开发,并配合工艺布局、工装设备的前期规划,最终实现低成本、高柔性的精益生产。

关键词:纯电车 底盘整体合装 柔性 精益生产

Discussion about the Chassis Assembly Method for Flexible Production of New Energy Pure Electric Models

Jiang Changlin,Liu Guiyong,Su Xiaoyu

Abstract:This paper briefly introduces the purpose and current status of the overall assembly of automobile chassis, and proposes a chassis assembly method suitable for flexible production of various models. The main problems that may occur in the overall assembly of the chassis are explained, and corresponding countermeasures are given to the problems that occur in the high-flexibility production of each model. In this paper, the process requirements of the overall assembly of the chassis are proposed, which are used to constrain the design and development of products, and cooperate with the process layout and the preliminary planning of tooling equipment, and finally realize the lean production with low cost and high flexibility.

Key words:pure electric vehicle, chassis integral assembly, flexibility, lean production

1 引言

汽车底盘零件是整车的核心部件,对于新能源纯电车,其副车架、后桥、动力电池、驱动电机、高压线束等装配质量至关重要。底盘零件的整体合装能提升整车驾驶性能,但是底盘合装工艺是总装装配过程中最为复杂的一个工序,对车身精度、零部件精度,托盘精度和定位系统要求也比较高。本文针对不同新能源纯电车型在同一生产线柔性生产时,需要对产品提出相关的制造需求对产品进行设计约束,并对出现的问题制定了应对措施及建议。

2 背景

2.1底盘整体合装概述

纯电动汽车的底盘整体合装是将底盘模块装配到车身过程,而底盘模块是指在所有零件定位和装配到专用定位夹具上后,利用底盘合装线装配设备一次性将前后悬架总成/电池总成整体安装到车辆底部的总成模块[1],底盘模块示意图见图1。由于底盘总成的连接件都是整车最重要的紧固件,精确定位和有效装配关系到整车的行驶性能和安全性,是装配规划、生产控制、质量控制的重点,因此底盘整体合装的制造工艺门槛会相对较高。……

登录APP查看全文