一种生物质防架桥进料机构的设计
2021-11-05黄灿军
黄灿军



【摘 要】为解决生物质加工应用过程中进料机构内物料的架桥与挂壁问题,一般采用改进料斗、料仓的结构设计,以及采用振动、气体喷吹、机械搅动等辅助装置防架桥技术,但都未能彻底消除料仓的侧壁对物料流动的阻碍作用。论文提出了一种长方形锥型或正方形锥型的活动壁料仓的设计,通过在料仓壁的内侧安装由电机驱动的传送带,彻底改变物料仅依靠自身重力进行下落的进料方式,并且传送带速度不一致对物料整体产生剪切效果,从而有效防止物料的挂壁与架桥现象。
【Abstract】In order to solve the problems of material bridging and wall hanging in the feed mechanism in the process of biomass processing, the improved structure design of hopper and silo and the anti-bridging technology of auxiliary devices such as vibration, gas injection and mechanical agitation are generally adopted, but the side wall of silo can not completely eliminate the blocking effect of material flow. This paper presents a design of rectangular cone or square cone type movable wall silo. Through the installation of the motor driven conveyor belt in the inner side of the silo wall, completely change the feeding mode that material only rely on its own gravity to fall. The speed of the conveyor belt is inconsistent to produce a shear effect on the whole material, so as to effectively prevent the material wall hanging and bridging phenomenon.
【關键词】防架桥;生物质;进料机构
【Keywords】anti-bridging; biomass; feed mechanism
【中图分类号】TS210.3 【文献标志码】A 【文章编号】1673-1069(2021)10-0179-03
1 引言
木质纤维素在地球上分布广、含量多,每年大约有1000亿吨的生成,是一种来源广泛、价格低廉的可再生资源。利用废弃木材、竹子、农业秸秆等天然生物质材料进行造纸制浆、发酵生产酒精、制备复合木塑材料、生产生物质燃料等已形成规模化产业。在生物质材料的再加工和循环利用过程中,由于物料的形状不规则、密度小,物料容易吸收水分而膨胀、压实,物料间发生缠绕、拉扯,物料与仓壁间发生黏连等现象,导致其流动性差,经常在料仓中产生架桥或挂壁等现象,使加料不均匀或不连续,严重时会影响加工机械的性能。因此,防架桥与破拱技术成为生物质利用技术的研究热点之一。在防架桥技术专利方面,中国在2007年开始相关技术专利申请量快速上升,2013年达到高峰,目前中国防架桥专利申请量为世界的前二位,申请量超过了1000件[1]。……
