APP下载

PDCA循环管理方法在消毒供应中心改造中的实践与成效

2020-09-02余仙容陈美铠叶培英张崇琳徐爱梅

中外医学研究 2020年21期
关键词:PDCA循环成效改造

余仙容 陈美铠 叶培英 张崇琳 徐爱梅

【摘要】 目的:探讨PDCA循环管理方法在消毒供应中心(central supply service department,CSSD)改造中的实践与成效。方法:针对CSSD改造前灭菌区及无菌区存在温湿度过高的现象,应用PDCA循环管理方法,提出“225”改造方案并付诸实施。对改造前(2018年10-12月)及采取PDCA循环管理法改造后(2019年10-12月)CSSD設备维修间、待灭菌区、无菌区的温湿度差异进行分析。结果:改造后,CSSD设备维修间、待灭菌区、无菌区温湿度均较改造前明显下降,差异有统计学意义(P<0.01)。结论:PDCA循环管理法对CSSD改造后温湿度的控制效果显著,从而有效提高消毒供应中心的工作质量,值得推广。

【关键词】 PDCA循环 消毒供应中心 改造 成效

doi:10.14033/j.cnki.cfmr.2020.21.068 文献标识码 B 文章编号 1674-6805(2020)21-0-03

Practice and Effect of PDCA Cycle Management Method in the Reconstruction of Central Supply Service Department/YU Xianrong, CHEN Meikai, YE Peiying, ZHANG Chonglin, XU Aimei. //Chinese and Foreign Medical Research, 2020, 18(21): -168

[Abstract] Objective: To explore the practice and effect of PDCA cycle management method in the reconstruction of central supply service department (CSSD). Method: In view of the high temperature and humidity in the sterilization area and sterile area before the reconstruction of CSSD, the PDCA cycle management method was applied to put forward the “225” reconstruction plan and put it into practice. The temperature and humidity differences of CSSD equipment maintenance room, sterilization area and sterile area before reconstruction (October to December 2018) and after reconstruction with PDCA cycle management method (October to December 2019) were analyzed. Result: After the reconstruction, the temperature and humidity of CSSD equipment maintenance room, sterilization area and sterile area decreased significantly compared with those before the reconstruction, and the differences were statistically significant (P<0.01). Conclusion: PDCA cycle management method has a remarkable effect on temperature and humidity control after CSSD reconstruction, so as to effectively improve the work quality of CSSD, which which is worth popularizing.

[Key words] PDCA cycle management Central supply service department Reconstruction Effect

First-authors address: Fujian Maternal and Child Health Hospital, Fuzhou 350001, China

消毒供应中心(central supply service department,CSSD)担负着全院医疗器械、物品的回收、消毒、灭菌、保管、发放等工作,其工作质量的合格与否直接影响到临床科室医疗护理质量及医院的感染管理控制[1-2]。对于CSSD而言,灭菌区和无菌区是中心的重中之重,也是成品之处。医疗器械消毒目前首选压力蒸汽灭菌方法。CSSD改造中,因现有环境和布局问题导致灭菌间和无菌间的温湿度控制始终不达标,成为工作难点。环境的温湿度过高影响工作效率、产品质量,导致一次性无菌物品的储存存在安全隐患。压力蒸汽灭菌器是一个较大的发热源,一般其表面温度达到130 ℃,降低温度主要依靠不断的换气和排气,使温度达到标准的要求[3]。王灵红等[4]2016年11月-2017年10月对绍兴市柯桥区19家医院调查中发现,CSSD工作区的温湿度通风达标只有6家,达标率仅为31.57%。国家卫生和计划生育委员会WS310.1-2016发布的消毒供应中心管理规范中提出,去污区温度16 ℃~21 ℃、相对湿度30%~60%;检查包装及灭菌区温度20 ℃~23 ℃、相对湿度30%~60%;无菌物品存放区温度低于24 ℃、湿度低于70%。……

登录APP查看全文

猜你喜欢

PDCA循环成效改造
计算机技术应用于医院固定资产管理中的必要性及成效分析
PDCA循环应用于
对高层建筑结构加固改造的相关问题分析
300MW机组顶轴油系统改造
论电梯单开门改双开门的改造方式