轻微型无人机电动力系统动力学模型建立
2020-08-26安斯奇刘晓锋侯宽新徐星辰
安斯奇 刘晓锋 侯宽新 徐星辰



摘 要:针对数字电子调速器、无刷直流电动机和定距螺旋桨组成的典型轻微型无人机的电动力系统,以推导和辨识的方法建立动力学模型。首先,结合组成部件的输入输出特性,考虑到轻微型无人机的低速工况,以部件级推导方法建立的电动力系统动力学模型由线性项和非线性项混合组成。其次,给出轻微型无人机电动力系统的动力学模型参数辨识方法。采用特制编码盘等惯量替代螺旋桨,使用动态响应结果辨识线性项参数,使用稳态关系辨识非线性项参数。最后,通过特制的地面测试台架,验证建模方法的正确性。
关键词:无人机;电动力系统;动力学建模;参数辨识;等惯量替代
DOI:10.15938/j.jhust.2020.03.006
中图分类号: TM331;V279
文献标志码: A
文章编号: 1007-2683(2020)03-0033-07
Abstract:Focused on UAV(unmanned aerial vehicle) equipped electric power plant composed by Electric speed controllers, brushless DC motors and fix-pitched propellers, a modeling method combined deduction with identification is studied. Firstly, in consideration of typical flight modes, the dynamic model of electric power was deduced based on component characteristics, and the model shows a nonlinear differential formula with a linear term and a nonlinear term. Secondly, an identification method is given. To avoid the aerodynamical nonlinear term, the propeller was replaced by a specialized disc-shaped coder with equivalent inertial moment, and the linear parameters were identified directly through output response. Afterwards, the nonlinear parameter was identified by static in-and output signals. Finally the method of dynamic modeling is proved to be effective on a ground test unit.
Keywords:unmanned aerial vehicle; electric power plant; dynamic modeling; parameter identification; equivalent replacement on inertial of moment
0 引 言
搭載在轻微型无人机上的动力系统决定了航空器的飞行性能,从而间接地影响和决定了载荷类型或标准,而一些重质、昂贵的应用性载荷受制于载具的动力缺陷,不能充分地发挥其作用[1]。其次,已经工业化生产的轻微型无人机的整体设计思路偏于简单和保守,飞行(动力)控制系统并不允许部件运行在性能包线的边缘附近,从而限制了部分极限性能,即以牺牲部分动力指标来换取系统的整体安全稳定。此外,保守的控制器设计,对经济性指标往往顾及乏力,使得动力装置的维护周期短、维修费用高以及航空器的续航时间短等成为民用无人机的短板。
通常而言,应用在轻微型无人机上的典型电动力系统包含3个部分[2-3]:功率输入部件、功率转化部件和功率输出部件。……
