基于PSIM的移相联结电路仿真教学研究
2018-06-08汪恒胡小艳
汪恒 胡小艳
PSIM - Based Simulation Research on Phase - Shifting 30 ?Series
Double - Linking Circuit
WANG Heng, HU Xiaoyan
(Yancheng Teachers College, School of New Energy and Electronic Engineering, Yancheng, Jiangsu 224051)
Abstract In order to improve the teaching quality of "Power Electronics Technology", an equivalent circuit model is established by taking the phase-shifted 30 ?tandem rectified rectifier circuit as an example, and the simulation analysis is carried out by using PSIM software. By simulating the circuit output voltage waveform and input current harmonics, we can enrich the theoretical and experimental teaching content, deepen the students' understanding and mastery of the phase shift 30 ?tandem double rectification rectifier circuit, and enhance the students' interest in learning "Power Electronics Technology".
Keywords multiple rectifier circuit; simulation teaching; PSIM
0 引言
電力电子技术是高等院校电气工程及自动化类专业的一门重要专业基础课程,主要讲述各种变流电路原理及其工作波形等内容。[1]该课程是一门理论性与实践性都很强的课程,在教学过程中,理论教学和实验教学都占有十分重要的地位。但是,传统理论教学比较单调枯燥,学生学习兴趣不高;传统实验教学对实验仪器的依赖很重,很多复杂电路无法让学生动手做实验。借助计算机仿真技术,既可以丰富理论教学内容,提高学生学习兴趣,又可以弥补实验室硬件条件的不足,减少实验耗材,对培养高职院校学生的创新实践能力具有重要意义。[2-6]
PSIM 是一款专门用于电力电子领域以及电机控制领域的仿真应用包软件。[7]PSIM 具有仿真速度快、用户界面友好、波形解析功能全面等特点,为电力电子电路的解析、控制系统设计、电机驱动研究等有效提供强有力的仿真环境。
2 基于PSIM的电路仿真
波形仿真时长为0.05s。
3 输出电压波形、输入电流波形及谐波分析
图3为仿真电路的输出电压Ud1、Ud2及Ud波形。两组三相全控桥的输出电压波形都为六脉波波形,二组的输出电压Ud1比一组的输出电压Ud2相位滞后30啊4蟮淖苁涑龅缪刮?2脉波波形。仿真结果与理论波形一致。
仿真结果也与理论波形一致。图5从上到下依次为输入电流ia1、ia2及iA的谐波频谱图。由图可见,60Hz的基波分量比各次谐波分量更高。ia1和ia2谐波次数为(k为正整数)次谐波,300Hz和420Hz的分量分别为5次和7次谐波,660Hz和780Hz的分量分别为11次和13次谐波。……
