APP下载

淤泥质土地层盾构机滚动角纠正施工技术研究

2018-01-25朱俊阳

价值工程 2018年35期
关键词:施工技术

朱俊阳

摘要:针对福州地铁6号线莲花站~滨海新城站区间隧道盾构机掘进过程中出现滚动角过大的问题,本研究通过理论分析、现场实测的方法,推导了一种纠正淤泥质土中盾构机滚动角施工所需千斤顶数量的公式,并对施工方法可行性、整治措施及整治效果进行了研究。研究表明:盾构机自身劳损及淤泥质土流塑性较高是盾构机滚动角失控的关键原因,本方案操作简单,能有效纠正盾构机滚动角,可为相关研究提供借鉴作用。

Abstract: Aiming at the problem that the rolling angle of the shield machine is too large in the tunnel of Lianhua Station and Binhai Xincheng Station of Fuzhou Metro Line 6, this study deduces a kind of correction of the rolling angle of the shield machine in the muddy soil through theoretical analysis and on-site measurement. The formula of the number of jacks required for construction, and the feasibility of construction methods, remediation measures and remediation effects were studied. The research shows that the shield machine's own strain and high muddy soil flow plasticity are the key reasons for the uncontrolled rolling angle of the shield machine. The scheme is simple in operation and can effectively correct the rolling angle of the shield machine, which can provide reference for related research.

關键词:盾构机;滚动角;淤泥质土;施工技术

Key words: shield machine;rolling angle;construction technology

中图分类号:U45                                           文献标识码:A                                  文章编号:1006-4311(2018)35-0169-03

0  引言

地层的不均匀性、盾构机操作不合理性等多种因素极易引起盾构滚动角的变化,当前关于盾构滚动角调整的研究中,崔明[1]针对盾构穿越闽江出现的滚动角变化,提出在油缸撑底垫钢靴块控制盾构机的滚动;赵毅昕[2]针对盾构机机体出现的严重扭转,介绍了修正的实施方案;贾璐[3]对特殊地质条件下盾构机脱困技术进行了研究;郭瑞[4]提出改变刀盘的旋转方向来调整滚动角的方法。这些研究中有的需盾构开仓作业,操作风险较大,或并不适用于淤泥质土等复杂地层。

本研究设计出了一种适用于淤泥质土等复杂地层纠正盾构机滚动角的方法,推导出了相关公式,整治措施效果明显。

1  工程概况

福州地铁6号线莲花站~滨海新城站从滨海新城站始发,沿规划道庆路向西掘进至莲花站,区间隧道主要农田、鱼塘及水系,线路纵断面呈“V”字坡,全长1190.96m,覆土厚度约7.10m~15.21m,区间主要穿越地层主要为淤泥质土层、富水砂层等不良地质,采用S812旧盾构机进行盾构施工。……

登录APP查看全文

猜你喜欢

施工技术
建筑混凝土施工技术要点及有效对策分析
桥梁预应力工程的施工技术研究
高压输配电线路工程施工技术控制之我见
试析建筑工程施工技术及其现场施工管理探讨
浅析水利工程建设中的混凝土施工技术与施工管理
探讨水利水电工程防渗墙的施工技术
高层建筑主体结构施工技术及质量控制研究
施工技术在水利水电工程中的重要应用探究
水利水电工程建筑的施工技术及管理分析
试论关于水利工程冬季施工技术