管材壁厚对双直径圆管吸能元件成形与自由翻转的影响
2017-07-15王陶雷君相彭彦君高文静郭丰伟
王陶+雷君相+彭彦君+高文静+郭丰伟



摘要: 利用ABAQUS 6.14软件模拟了在不同壁厚下,材料为20钢双直径圆管吸能元件的液压胀形、折叠和自由翻转的过程.并分析了不同壁厚下液压胀形与折叠后的壁厚分布,准静态压缩翻转变形模式以及准静态压缩时翻转力与翻转半径与推导公式之间的关系.结果表明:壁厚减薄程度与管材初始壁厚大小有关;20钢双直径圆管成形后发生轴向压缩时其自由翻转的模式多为内管外翻;推导的翻转力与翻转半径理论公式与实际测得翻转力与翻转半径的结果比较吻合.
关键词: 液压胀形与折叠; 双直径圆管; 翻转力; 翻转半径
中图分类号: TG 386文献标志码: A
Influence of Tube Thickness on the Forming and Free
Inversion of Energy Absorption of Double Diameter Tube
WANG Tao,LEI Junxiang,PENG Yanjun,GAO Wenjing,GUO Fengwei
(School of Materials Science & Engineering, University of Shanghai for
Science and Technology, Shanghai 200093, China)
Abstract: Using ABAQUS 6.14 software to simulate the process of hydraulic forming and folding and free inversion of the original 20 steel double diameter tube with different thickness.The relationship between the thickness distribution of the hydraulic forming and folding,the mode of quasistatic compression deformation and the relationship between the inversion force and the inversion radius of the quasistatic compression and the formula are analyzed.The results show that the tube thickness reduction is related to the degree of initial tube thickness.The mode of selfreversal in the axial compression of 20pipe doublediameter pipe is mostly inner tube valgus.The theoretical formula of the reversal force and the turning radius is consistent with the actual measured turning force and the turning radius.
Keywords: hydraulic forming and folding; double diameter tube; inversion force; inversion radius
近年來,随着公共安全的保护得到越来越多的关注,人们加强了关于结构耐撞性和能量吸收装置的研究[1-2].双直径圆管作为一种有效吸能元件,能够实现载荷最为稳定的目的[3],因而国内外对其研究也越来越多[4].
利用内高压成形技术[5],制备出合格的双直径圆管吸能元件.双直径圆管自由翻卷能量吸收结构载荷恒定平稳,成为材料和结构的能量吸收中最理想的能量吸收结构[6-7].在对双直径圆管施加准静态载荷时,在圆角变形区自由翻转时的3种主要有效变形模式:双直径圆管内管外翻、双直径圆管外管内翻和双直径圆管内管外翻与外管内翻复合[8-9].翻转力随着轴向位移的不断增加而增大,逐渐趋向于稳定[10].
本文通过对双直径圆管吸能元件的结构设……
