涡扇发动机排气喷流流场和声场数值模拟
2017-07-01田玉雯
田玉雯
【摘 要】为了适应严格的飞机适航噪声标准,降低发动机排气噪声是现今涡扇发动机设计时必须考虑的因素之一。本文采用大涡模拟(LES)和声学软件,计算了不同边界条件下排气喷管流场及声场特性。研究表明,喷管入口压比和温度同时影响着喷流噪声,当压力增大时,喷流噪声的声压级整体随之增加,且在-36°到36°区间增大幅值明显。内涵入口温度增加时,总声压级整体增加, 且当内涵入口温度每升高100K时,总声压级增加幅度为2-4dB。
【关键词】涡扇发动機、排气噪声、大涡模拟、总声压级
Numerical caculation of flow and acoustics fields for
turbofan engine exhaust flow
TIAN Yu-wen
(Shanghai Aircraft Design and Research Institute, Shanghai 201210)
【Abstract】In order to adapt to strict standard of seaworthy noise, one of the factors that should be taken into account is exhaust jet noise reduction when turbofan engine exhaust system design today. This article adopts the method of combination of LES and acoustics software, analysis the fluid and acoustic field features in the different boundary conditions. The calculation results show that both inlet pressure radio and temperature affect the jet noise. With the increase of inlet pressure, the jet noise SPL is obviously higher in the range of -36°to 36°. And with the increases of inlet temperature, OSPL overall increased. Besides, when the temperature rises every 100K, the jet noise increases 2-4dB.
【Key words】Turbofan engine; Exhaust jet noise; Large eddy simulation (LES); FW-H equation; Overall sound pressure level (OSPL)
从涡喷发动机的出现到今,航空燃气涡轮发动机技术水平得到了很大提高。但是,发动机的高速喷气流产生的强烈的喷流噪声,带来了巨大的噪声污染,使得噪声问题日益严重。另一方面,人类对环境保护问题的日益重视,使得喷气式飞机噪声问题变得越来越突出,国际航空界不得不重视和面对飞机噪声问题。从此各大飞机制造公司和航空研究机构开始投入巨大的力量研究飞机的噪声问题,对飞机各种噪声源噪声辐射特征进行了大量的理论和实验研究,噪声水平已经成为发动机气动设计的一个重要指标[1]。根据Lighthill声类比理论的分析,喷流噪声与喷流速度的6-8次方成正比[2]。为了降低喷流噪声,可以通过增大涵道比和降低喷流速度的方式降低发动机的噪声,随着涡轮风扇发动机涵道比的不断提高,相应的排气速度减小,与风扇压气机噪声以及涡轮噪声相比,排气噪声逐渐减小[3]。……
