APP下载

座舱空气非定常流动特征及数值模拟策略2012年研究进展报告

2017-03-15何枫姚朝晖张锡文刘正先

科技创新导报 2016年29期
关键词:热对流

何枫++姚朝晖++张锡文++刘正先

摘 要:對Re数不高的热对流流场,目前流场CFD数值模拟策略主要采用大涡模拟和时均湍流模式两种方法。在进行大涡数值模拟时,其中亚格子模式分别采用Smagorinsky-Lilly模式、壁面自适应当地涡粘模式、Smagorinsky-Lilly动力亚格子模式、Vreman的亚格子模式,主要对比各种亚格子模式在计算热对流时的优势和差异。进行时均湍流模式数值模拟时,采用各种湍流模式,对比计算差异,并与LES对比,确定对热对流湍流信息的抑制程度,为今后改进湍流模式奠定基础。在热对流的数值模拟中,网格技术也是关键,采用根据初算结果,调整网格密度分布技术,加快计算收敛。根据检测固定点参数的变化以及热通量平衡状态,判定计算是否收敛。实验分别采用激光粒子测速、热线进行速度测量,采用热电偶测量温度,校正CFD计算结果。

关键词:热对流 湍流 数值模拟

Progress Report of 2012

He Feng1 Yao Chaohui1 Zhang Xiwen1 Liu Zhengxian2

(1.Tsinghua University; 2.Tianjin University)

Abstract:Currently,the solution strategies for not high Re number convection is large eddy simulation method and RANS with turbulent models method. For the LES method, various sub-grid scale models are used, such as Smagorinsky- Lilly model, Lillys dynamic Smagorinsky model Vremans model and wall-adapting local eddy-viscosity model, to compare the difference and the applicability for convection flow field. The simulation data with the turbulent models are compared with the experimental data and LES data in order to determine that how much turbulent information is restrained by the method of turbulent models. Grid technique also play key role for simulation convergence. Adjusting grid density and monitoring surface variables and the balance of the heat transfer flux can help to reach the simulation convergence. Some related experiments are done by the particle image velocimetry (PIV) and hot wire technology.

Key Words:Convective flow; Turbulence; Numerical simulation


登录APP查看全文

猜你喜欢

热对流
延时起爆装置可靠点火技术的研究
创新实验活动 发展科学思维
二维湍流热对流最大速度Re 数特性及流态突变特征Re 数*
藏北地区午后热对流天气过程特征
8000kVA超大容量感应调压器空载运行油温超温的原因分析研究
二维湍流热对流羽流运动路径对传热特性的影响*
不锈钢板传热特性试验研究
极高Ra湍流热对流模拟及其流动特征
注塑成型Hele-Shaw流动模拟中热对流的异步长求解
预紧力作用下滚珠丝杠温升的理论分析及试验研究*