浅谈大体积混凝土施工质量的监理控制
2012-10-15陈竣
陈竣
摘要:高层建筑施工中,基础工程成为影响建筑施工总工期和总造价的重要因素,而作为深基础工程的控制核心在于大体积混凝土的施工。文章着重分析了在大体积混凝土工程中裂缝产生的原因,并指出易发生问题的几个关键环节,通过对高层建筑深基础大体积混凝土工程的质量控制过程进行分析,旨在阐述监理单位在质量控制的重要作用,并为监理工程师提供了一些切实可行的控制方法以供借鉴参考。
关键词:大体积混凝土;质量控制;监理工程师
Abstract: In the high-rise building construction, the foundation engineering has become the important factor of influencing construction total time limit and total cost, and the control core of the deep foundation engineering is the mass concrete construction. This article analyzes the large volume concrete cracks causes, and pointes out a few key links which easily cause problems, through the analysis of the quality control process the high-rise buildings deep foundation and large volume concrete project, it aims at elaborating the important role of supervision units in the quality control, which provides some feasible control method for the supervision engineers, for their reference.
Key words: mass concrete; quality control; supervision engineer
中圖分类号: TU71文献标识码:A文章编号:2095-2104(2012)
1 引言
随着我国高层建筑的普及,基础工程成为工程质量的控制重点,尤其是大面积的基础工程,由于基础深,底板厚,混凝土浇筑量大,在大体积混凝土浇筑后的凝结硬化过程中,由于水泥的水化作用而释放出大量的热量,这些热量因大体积混凝土在短时间内不容易导出,因而使底板中心温度逐步升高,并与底板表面之间形成较大的内外温差,产生温度应力。当温度应力超过混凝土早期所能承受的拉应力极限值时,底板就会出现裂缝,影响到混凝土的整体性和防水性,因此大体积混凝土浇筑成为承包单位需要重点控制的过程。
目前国内外控制大体积混凝土开裂的主要技术措施是控制温升、延缓降温速率、减小混凝土收缩、提高混凝土极限拉伸、改善约束程度和设计构造等方面,主要从以下几个环节进行控制:水泥的选择、掺入外加剂、控制混凝土的浇筑温度和改进振捣工艺、采用先进的电子测温设备、做好混凝土的养护。……