APP下载

预拉伸对TRIP钢微观组织及成形性能的影响

2025-08-09刘坡王润铮黎旺陈龙茂马海坤李青韩鹏彪

河北科技大学学报 2025年4期
关键词:延伸率马氏体铁素体

中图分类号:TG142.1 文献标识码:A DOI:10.7535/hbkd.2025yx04009

Influence of pre-stretching on microstructure and formability of TRIP steel

LIU Po1,WANG Runzheng 2,3 ,LI Wang²,4,CHEN Longmao¹,MA Haikun 2,4

LI Qing5,6,HAN Pengbiao²,3

(1.Guangxi Key Laboratoryof Special Engineering Equipment and Control,Guilin Universityof Aerospace Technology, Guilin,Guangxi 541004,China;

2.Scholof Materials ScienceandEnginering,Hebei UniversityofScienceand Technology,Shijiazuang,Hebei O5oo18,China; 3.Hebei Key Laboratory of Material Near-Net Forming Technology,Shijizhuang,Hebei O5oo18,China;

4.Hebei Short Process Steelmaking Technology Innovation Center,Shijiazhuang,Hebei O5o018,China; 5.Hebei Aerospace Superally Industry Technology Research Institute,Xingtai,Hebei O5480o,China; 6.Zhong Hang Shang Da Superalloys Company Limited,Xingtai,Hebei O548oo,China)

Abstract:To study theefectof pre-deformation onmartensitictransformationand microstructuralevolution in transformationinduced plasticity(TRIP)stels,andtoivestigate theformingablityofTRIPsteels,theTRIP590stelplate was selected as the testingmaterial,and pre-stretching in the range of 0~0.12 was applied on two sizes of specimens(standard specimenand wide specimen).Tensile testing and microstructure observation wereconductedonthe pre-stretched specimens. The efectof pre-stretching on the anisotropy and bulging propertiesof wide specimens wasanalyzed.The results show that pre-stretchingcausesacertaindegreeofmartensitictransformationinTRIPsteel,andalargerprestretching producesmore dislocations,bringing inincreaseinmaterialstrengthanddecreaseinplasticity;Thehighestproductof strengthandelongation is obtained at pre-stretchofO.O2;Thelargerpre-stretchalsohasanefectonmaterialanisotropy,and elongationof the 90∘ oriented specimenisaliter higher;the peak loadandcuppingvalue gradualldecrease with increaseof pre-stretch.Moderate pre-stretching canimprove theoverallperformanceof the TRIPsteel,whileexcesivepre-stretchingreducesitsformability, which provides reference for structure design and formability of TRIP.

Keywords:ferous metalsadtheirallys;martensitephasetransformation;TRIPstel;microstructure;prestretching;cupbulging

目前,汽车工业发展迅速,汽车的安全问题愈发重要,这就对汽车用钢的强度和塑性提出了更高的要求,先进汽车用钢的开发展现出巨大的发展潜力和需求[1-2]。目前汽车用钢已经发展到第3代,相变诱发(trans-formation induced plasticity,TRIP)钢作为典型的汽车用钢有很大的发展前景[3-4]。TRIP 钢通过诱导马氏体相变提高钢板的强度和塑性,是一种综合力学性能较好的高强度钢板[2-5]。

TRIP 钢具有较好的综合力学性能,但不同程度的变形会对最终成形构件的性能产生复杂影响,使其使用性能和服役寿命下降。胡汉江等[指出预应变将显著降低TRIP钢的加工硬化能力,较大的预应变量会使稳定性较差的残余奥氏体发生转变,而较为稳定的残余奥氏体较难发生转变。郝硕等[研究发现,预应变试样的抗拉强度和总延伸率均得到了一定程度的提高,且预应变能够促进马氏体发生相变,同时又不会改变α′ 马氏体的形核长大机制,证明其是一种提高综合性能的有效方法。有研究表明碳和锰的富集会提高奥氏体的稳定性,确保奥氏体向马氏体的转变[8]。LI等[9]研究了大范围预应变(预应变达到0.2)对奥氏体不锈钢接头微观组织的影响。宋博等[10]在对钛合金的研究中提到,当预变形量较大时(如 12% 和 20% ),钛合金经预变形后再进行时效处理可以获得细化的 α 相和更好的强化效果。

预拉伸变形导致大部分奥氏体转变为马氏体,预应变使奥氏体组分降低、马氏体含量增加,因此材料的屈服强度和抗拉强度增大,而总延伸率降低[11-12]。……

登录APP查看全文

猜你喜欢

延伸率马氏体铁素体
固溶温度对Ti-10Mo-6Zr-4Sn-3Nb合金力学性能及显微组织的影响
贝氏体型非调质钢连铸圆坏组织和力学性能研究
Q420高强钢板探伤不合格原因分析及改善措施
热轧卷冷却方式对冷轧低合金高强钢H800L性能的影响
形状记忆合金结构的拓扑优化设计方法
焊接参数对6082 T6铝合金型材焊接后性能的影响
46MnVS5非调质钢涨断连杆掉渣原因分析及改进