弹性联轴器失效原因分析及管理策略
2021-09-28韩传伟付云飞关银柏
韩传伟 付云飞 关银柏



DOI:10.16660/j.cnki.1674-098X.2106-5640-1430
摘 要:弹性联轴器是一种有效传递扭矩的驱动形式,在转动设备中得到广泛应用。在使用过程中,设计、选型与维护不当将导致设备出现严重故障。本文对一款采用芯型橡胶缓冲块的弹性联轴器进行失效原因分析,开展宏观形貌、傅里叶红外光谱、体视显微镜、力学性能等检查,并对联轴器选型进行计算校核。最终,针对这类弹性联轴器给出了相应管理策略,有效提高了设备可靠性。
关键词:弹性联轴器 老化 对中 振动
中图分类号:TL38 文献標识码:A 文章编号:1674-098X(2021)06(b)-0048-04
Failure Reason Analysis and Management Strategy of Flexible Shaft Coupling
HAN Chuanwei FU Yunfei GUAN Yinbo
(Suzhou Nuclear Power Research Institute,Suzhou, Jiangsu Province, 215004 China)
Abstract: Flexible shaft coupling is an effective driving form of torque transmission, which is widely used in rotating equipment. During application, improper design, type selection and maintenance will lead to serious equipment failure. This paper analyzes the failure reason of a flexible coupling with rubber core element, the macroscopic morphology, fourier infrared spectroscopy, stereo microscope, mechanical properties and other inspections are carried out, and checks the type selection of coupling. For this kind of flexible shaft coupling, the management strategy is given, which effectively improves the reliability of the equipment.
Key Words: Flexible shaft coupling; Aging; Alignment; Vibration
旋转设备通常采用独立的驱动和被驱动部件,而避免使用同一个轴,联轴器起到了驱动部件与被驱动部件机械连接与力矩传输的作用[1]。联轴器一般可分为刚性联轴器与弹性联轴器,其中弹性联轴器因可补偿一定的偏心,起到减振及缓冲作用,在多种旋转设备中得到应用[2-3]。
在现场使用过程中,弹性联轴器将不可避免发生故障与失效,严重影响了设备的可用性。因此,有必要对失效的原因进行深入分析,并制定行之有效的预防性管理策略。
1 背景信息
1.1 失效信息
现场巡检发现发电机定子冷却水离心水泵振动较高,已超出技术规程。维护人员立即执行停泵解体维修操作。拆开泵联轴器,发现其中缓冲块老化开裂变形且磨出大量黑色粉末,如图1所示。
如联轴器缓冲块完全碎裂,不仅泵组将停运,还将导致金属齿爪之间出现刚性撞击,从而进一步造成潜在损害[4-5]。……
