APP下载

陶瓷智能浮雕机设计

2021-08-26黎泉朱艳贾广攀吴甲兰

河南科技 2021年9期

黎泉 朱艳 贾广攀 吴甲兰

摘 要:中国四大名陶之一的坭兴陶市场需求日益增长,但是其浮雕工艺的手工生产率低下,无法满足高效生产要求。本文结合市场需求,设计了一款陶瓷智能浮雕机。根据坭兴陶浮雕工艺的特点,机械结构设计为四轴联动。本设计采用Mach3软件作为PC机控制软件,通过Mach3控制板与机械结构连接,并通过位置传感器形成闭环控制,使用ArtCAM软件将雕刻图案矢量图转换为浮雕的曲面图,并生成加工代码,最后通过实例验证了浮雕机设计的正确性和可行性。

关键词:陶瓷;浮雕;Mach3;ArtCAM

中图分类号:UTQ174.5 文献标识码:A 文章编号:1003-5168(2021)09-0072-03

Abstract: The market demand for Nixing pottery, one of the four famous potteries in China, is growing day by day, but the manual productivity of its relief craftsmanship is low, which cannot meet the requirements of efficient production. This paper designed a ceramic intelligent relief machine based on market demand. According to the characteristics of Nixing pottery relief craftsmanship, the mechanical structure was designed for four-axis linkage. This design used Mach3 software as the PC control software, connected with the mechanical structure through the Mach3 control board, and formed a closed-loop control through the position sensor, used the ArtCAM software to convert the engraving pattern vector diagram into a relief surface diagram, and generated the processing code, finally verified the correctness and feasibility of the relief machine design through an example.

Keywords: Nixing pottery;relief;Mach3;ArtCAM

钦州坭兴陶是中国四大名陶之一,据《钦州县志》记载,坭兴陶的历史可以追溯到新石器时代,经过长远的历史积淀,坭兴陶凝聚了丰富的物质文化和精神文化,具有较高的艺术收藏价值。坭兴陶的泥料可塑性和黏性较强,人们可以在坯体表面进行雕、刻、镂等不同的艺术装饰,而浮雕则是耗时较长的工序之一,同时对工匠的技能手法要求较高。坭兴陶的浮雕与一般的浮雕具有较大的不同,一般浮雕都是在坯体或者其他材质平面上浮起一定厚度的形象,而坭兴陶的浮雕则采用平面以下另雕突起的方式,它的最高点顶多與器物平面相当[1]。随着坭兴陶产业的不断优化升级和需求量的不断增大,坭兴陶的规模化生产对浮雕等制作工序以及生产率提出了新的要求,传统的手工浮雕工艺已不能满足市场需求。……

登录APP查看全文