APP下载

化学成分对ZGD410-700力学性能提升的影响

2021-06-20张雪洋陈礼年马波

汽车科技 2021年3期
关键词:力学性能

张雪洋 陈礼年 马波

摘  要:近年来,随着汽车轻量化要求不断提升,对汽车用高强高韧铸钢的研究显得非常重要。ZGD410-700为我公司高强高韧正火钢典型材质,本文通过添加Cr、Cu、V、Ni等合金元素,优化原有成分,提升ZGD410-700材质综合力学性能。实验结果表明:加入0.2-0.3% Cu的试样综合力学性能明显提升,屈服和抗拉强度分别为477Mpa、759Mpa,延伸率达到了19.1%。而分别添加Cr、V、Ni等元素,对强度及延伸的无明显改善或略有降低,且随着合金元素的过量添加,导致其强度富余而延伸率降低,若再高温回火则其综合力学性能明显下降。

关键词:高强高韧;ZGD410-700;合金元素;力学性能

中图分类号:TQ31      文献标识码:A     文章编号:1005-2550(2021)03-0140-03

The Influence of Chemical Composition On The Improvement of Mechanical Properties of ZGD410-700

ZHANG Xue-yang,  CHENG li-nian, MA bo

( Dongfeng Investment Casting,Chaohu 238000, China )

Abstract: In recent years, with the increasing requirements for lightweight automobiles, it is very important to study the high strength and high toughness cast steel used in automobiles. ZGD410-700 is the material produced by our company. In this paper, by adding Cr, Cu, V, Ni and other alloy elements, the original components are optimized to improve the comprehensive mechanical properties of ZGD410-700 material. The experimental results showed that the mechanical properties of the samples with 0.2-0.3% Cu were significantly improved, the yield and tensile strength were 477Mpa and 759Mpa, respectively, and the elongation reached 19.1%. When Cr, V, Ni and other elements were added respectively, the strength and extension were not significantly improved or slightly reduced, and with the excessive addition of alloying elements, the comprehensive mechanical properties of the elements were significantly reduced.

Key words: High Strength And High Toughness; ZGD410-700; Alloying Elements; Mechanical Property

张雪洋

毕业于安徽工业大学,工学硕士。现就职于东风精密铸造有限公司,主要从事工艺(材料)研发,金属材料和中温蜡硅溶胶铸造工艺,已发表论文2篇。

1    前言

铸钢件具有优良的综合力学性能,其广泛应用于矿山、石油、冶金等制造业中[1]。当前,随着汽车轻量化的深入,铸造碳钢因其高强高韧性、经济性等特点在轻量化过程中发挥着非常重要的作用[2]。根据某品牌客户产品生产要求,经过模拟受力分析,结合公司内材质标准,选择热处理为正火态的ZGD410-700材质应用于该产品。但由于该产品单重较大,结构复杂,为安全使用考虑,希望在现生产ZGD410-700基础上对综合力学性能进一步提高,本实验设计思路通过Cu、Cr、V、Ni合金元素的加入提高铸钢的强度[3],经过多次试验及综合力学性能对比,选择满足客户性能要求的铸钢材料。……

登录APP查看全文

猜你喜欢

力学性能
反挤压Zn-Mn二元合金的微观组织与力学性能
Pr对20MnSi力学性能的影响
Mn-Si对ZG1Cr11Ni2WMoV钢力学性能的影响
采用稀土-B复合变质剂提高ZG30MnSi力学性能
碳纤维增强PBT/ABS—g—MAH复合材料的力学性能和流变行为
纺织纤维弯曲力学性能及其应用
MG—MUF包覆阻燃EPS泡沫及力学性能研究
EHA/PE复合薄膜的力学性能和阻透性能
PA6/GF/SP三元复合材料的制备及其力学性能研究
INCONEL625+X65复合管的焊接组织与力学性能