X线技术诊断痛风性关节炎的应用效果分析
2020-11-09云惟高
云惟高

【摘 要】 目的 : 分析在诊断痛风性关节炎中应用X线技术的效果。方法 : 回顾性分析2019年2月至2019年8月来本院治疗的53例痛风性关节炎患者对应98个患病关节的CT、X线影像学表现,并对比分析这两种影像学的检出率和显示的病变现象。结果 : X线检出阳性关节率比CT高,差异有统计学意义(P<0.05),CT检查出的骨质破坏例数比X线多。结论 : 痛风性关节炎患者应用X线诊断的效果比较显著,综合X线特点和表现、实验室检查、临床症状能够在早期对痛风性关节炎进行诊断。但在检测隐匿性骨质破坏方面CT要比X线有优势,为此应联合使用CT、X线进行诊断,以提升诊断的准确率。
【关键词】 X线技术;痛风性关节炎;应用效果
EAnalysis of the application effect of X-ray technique in the diagnosis of gouty arthritis
Yun Weigao
The Second People's Hospital of Jilin City,Jilin Province, Jilin, Jilin 132000
[Abstract] Objective:To analyze the effect of X-ray technique in the diagnosis of gouty arthritis. Methods:The CT and X-ray imaging findings of 98 diseased joints in 53 patients with gouty arthritis who came to our hospital from February 2019 to August 2019 were retrospectively analyzed. And the detection rate and pathological phenomena of the two kinds of imaging methods were compared and analyzed. Results: The rate of positive joints detected by X-ray was higher than that of CT, and the difference was statistically significant (P<0.05). But the number of bone destruction cases detected by CT was higher than X-ray examination. Conclusion: The diagnosis of gouty arthritis by applying X-ray technique in patients with gouty arthritis is effective. Gouty arthritis can be diagnosed at an early stage by combining X-ray characteristics and manifestations, laboratory examinations, and clinical symptoms. However, CT is superior to the X-ray diagnosis in detection of occult bone destruction. Therefore, CT and X-ray technique should be combined in order to improve the accuracy of diagnosis.
[Key words] X-ray technique; Gouty arthritis; Application effect
痛風性关节炎是指滑囊、软骨、关节囊、骨质以及其他组织内存在尿酸盐沉积而引起的炎性反应和病损。还可由外伤、饮食以及天气变化等方面引起,严重危及患者的身心健康和生活质量[1]。临床诊断主要使用X线检查,本文作者为探讨此诊断方式的效果进行如下分析。
1 资料与方法
1.1 一般资料
选取本院53例2019年2月至2019年8月来院治疗痛风性关节炎患者,患病关节共有98个,男性27例,女性26例;年龄为27~82岁,平均(44.35±11.34)岁;病程为1个月~20年,平均(8.34±1.34)年。所有研究对象的受累关节都出现红、热、肿、痛、功能障碍等现象。所有研究对象均对本研究知情,并自愿签署知情同意书。
1.2 方法
CT检查:患者采取仰卧位,扫描患者踝足部位时,让其脚先进入,且双足地面与床面垂直,双足内侧间距1cm左右。扫描患者膝关节时也是仰卧位且脚先进入,双腿保持平直状态,双膝间距约为1cm左右。设置扫描厚度为1mm,设置层间距为0.5mm,设置FOV为327mm。使用估算法和MPR重建系统以及数据处理工作站对矢状位、冠状位以及横轴位进行针对处理。
X线检查:患者采取侧卧位,并保持双腿平直状态,对关节进行侧位拍片和正位拍片,拍摄膝关节时参数设置66kV、8.97mAs和23ms。……
