基于改进P&O的最大功率点追踪算法
2020-11-02曹瀚天朱良毅杨发友张靖
曹瀚天 朱良毅 杨发友 张靖



摘要:针对传统的光伏发电最大功率点追踪算法存在跟踪精度低和响应速度低等问题,本文提出基于改进P&O的最大功率点追踪。该控制策略是在P&O的基础上进行改进,引入自适应变步长因子,进而自适应的调节光伏输出最大功率点的大小,以达到准确追踪最大功率点的目的,从而提高了最大功率点追踪算法的动态性能。仿真结果表明本文所提控制策略能够快速准确追踪最大功率点。
Abstract: In view of the low tracking accuracy and low response speed of traditional photovoltaic power generation MPPT algorithm, this paper proposes maximum power point tracking based on improved P&O. This control strategy is improved on the basis of P&O, introducing an adaptive variable step factor, and then adaptively adjusting the size of the MPP of photovoltaic output to achieve the purpose of accurately tracking the maximum power point, thereby improving the dynamic performance of the MPPT algorithm. The simulation results show that the proposed control strategy can track the MPP quickly and accurately.
关键词:光伏发电;MPPT;自适应变步长因子;P&O
Key words: photovoltaic power generation;MPPT;adaptive variable step size factor;P&O
中图分类号:TP271.4 文獻标识码:A 文章编号:1006-4311(2020)29-0190-02
0 引言
太阳能产业正在快速发展,太阳能产业逐渐成为目前最具前景的新能源之一。现阶段,光伏发电技术正在日新月异的发展[1-2]。光伏阵列是光伏发电系统中非常重要的组件之一,外界环境的变化,极容易对光伏阵列板的运行进行干扰,光伏电路容易受光照和温湿度等因素条件的影响,进而影响光伏发电输出功率的随机性[3]。光伏发电技术存在输出功率波动性大等特点,故需要最大功率点追踪技术(MPPT)作为支撑[4]。近年来,对于光伏发电研究的算法有很多[5-6],大部分传统算法都能进行广泛应用 [7-9]。
为了提高和改善光伏发电系统中MPPT控制算法,本文以P&O作为研究基础,进一步提出基于改进P&O的最大功率点追踪算法。引入自适应变步长扰动因子是该控制算法的关键点,其中自适应变步长扰动步长的大小可根据光伏发电系统实际输出功率进行自适应的调节。……
