新型手动变速器换挡二次冲击仿真分析
2020-09-26李小龙成起强王新
李小龙 成起强 王新



摘 要:为了降低换挡过程中的二次冲击,提升用户体验,以降低换挡过程中输出端当量转动惯量为思路,文章设计了一款单向离合器式手动变速器。新型变速器将输出轴设计成两段,并以单向离合器相连,全部前进挡齿轮安装在输出轴的前段,与中间轴上各齿轮啮合传动完成变速变扭功能。运用ADAMS仿真软件,对其换挡过程进行动态仿真分析,获得新型手动变速器换挡二次冲击曲线,通过与传统手动变速器换挡二次冲击曲线的对比,揭示了新型手动变速器在提高换挡平顺性方面的优势,并通过仿真分析探究花键齿锁止角及棱线角与换挡二次冲击的关系,通过合理选择锁止角与棱线角数值,进一步降低换挡二次冲击。
关键词:变速器;单向离合器;同步器;ADAMS;仿真
中圖分类号:U463.212+.1 文献标识码:A 文章编号:1671-7988(2020)17-98-05
A Simulation on the Secondary Impact of New Type Manual Transmission*
Li Xiaolong, Cheng Qiqiang, Wang Xin
( School of Automotive Engineering, Tianjin Vocational Institute, Tianjin 300410 )
Abstract: This paper proposes a new structure of the manual gearbox designed by the author, in order to reduce the equivalent moment of inertia at the output during shifting, and then reduce the secondary impact during shifting. The new gearbox designs the output shaft into two sections, which are connected with a one-way clutch. All forward gears are installed in the front section of the output shaft. The gears meshing drive with each gear on the intermediate shaft to complete the variable speed twisting function. The article aims at gaining the shift secondary impact curve of new manual transmission, which utilizing ADAMS simulation software to perform dynamic simulation analysis on the shift process. Compared with the shift secondary impact curve of traditional manual gearbox, it reveals the advantages of the new manual transmission in improving the smoothness of shifting. The relationship between the locking angle and ridgeline angle of the spline teeth and the secondary impact of the gear shift is explored through simulation analysis. By properly selecting the values of the locking angle and the ridgeline angle, the secondary impact of the gearshift can be further reduced.
Keywords: Transmission; One-way clutch; Synchronizer; ADAMS; Simulation
CLC NO.: U463.212+.1 Document Code: A Article ID: 1671-7988(2020)17-98-05
前言
手动变速器换挡二次冲击是评价换挡操作性能的重要指标,过大的二次冲击将产生严重的振动及噪声,影响换挡操作的舒适性及同步器的使用寿命。
目前,降低换挡二次冲击的研究主要集中在同步器的结构分析及优化方面。其中李晓春和褚超美等人,利用ADAMS软件建立同步器多刚体动力学模型,揭示了花键齿几何参数对二次冲击峰值的影响规律,获得了最佳的花键齿参数组合,有效降低了二次冲击的峰值[1]。余晓霞和张志刚等人利用AMESim软件,建立同步器动态仿真模型,分析了输入端转动惯量、锁环摩擦系数及锁环摩擦锥角与换挡二次冲击、同步冲量等的关系,通过优化分析得到了最优模型,有效降低了二次冲击的峰值[2]。……
