参数化白车身结构轻量化多目标优化
2018-03-21王传青董传林马亮
王传青 董传林 马亮
摘要:利用SFE Concept建立某轿车白车身的参数化模型,采用有限元法对白车身的静态弯曲和扭转刚度、主要低阶模态进行分析,并将仿真结果与试验结果进行对比。将参数化白车身与动力总成、底盘、闭合件连接后,仿真分析整车正面100%碰撞安全性能并验证有限元模型的有效性。提出通过相对灵敏度分析确定白车身非安全件设计变量的方法,采用最优拉丁超立方方法生成样本点,基于径向基神经网络方法拟合近似模型,以白车身非安全件和正碰安全件为轻量化对象,通过第二代非劣排序遗传算法对白车身进行多目标优化设计。结果表明:在白车身静态弯曲刚度降低3.60%、静态扭转刚度降低3.91%、一阶弯曲模态固有频率降低0.09%、一阶扭转模态固有频率上升1.26%、正碰安全性能基本不变的情况下,白车身质量减少24.17 kg,减重7.42%,轻量化效果显著。
关键词:轿车; 参数化; 白车身; 轻量化; 多目标优化; 灵敏度
中图分类号:U463.1;TP31
文献标志码:B
文章编号:1006-0871(2018)01-0015-07
Abstract: The parametric model of passenger car body-in-white is built by SFE Concept. The static bend and torsion stiff, and the main modality of body-in-white are analyzed. The simulation result is compared with the test result. The body-in-white is connected with power assembly, chassis and closure members. The carload safety performance of 100% frontal impact is simulated and analyzed. The effectiveness of the finite element model is validated. A new method is presented, and the design variables of body-in-white unsafe parts are confirmed using relative sensitivity analysis. The sample points are generated using the optimal Latin hypercube method. The approximation model is fitted based on radial basis neural network method. The multi objective optimization design on body-in-white is carried out using NSGA-Ⅱ algorithm. The results show that the mass of body-in-white is reduced 24.17 kg(7.42%) on the conditions that the bend stiff is reduced by 3.60%, the torsion stiff is reduced by 3.91%, the bend modal frequency is reduced by 0.09%, the torsion modal frequency is increased by 1.26%, and the front impact performance is not changed obviously. The lightweight efficiency is significant.
Key words: passenger car; parameterization; body-in-white; lightweight; multi objective optimization; sensitivity
0 引 言
車身质量约占汽车总质量的30%~40%,在空载情况下,70%的油耗浪费在车辆自身质量上。[1]目前,国内汽车企业主要对零件材料强度和厚度进行减重优化[2-3],没有综合考虑零件的截面尺寸等因素,轻量化设计的潜能没有完全发挥出来。史国宏等[4]研究认为,利用SFE Concept参数化模型可以在早期设计阶段找到形状、厚度和尺寸各参数的平衡点。因此,应用参数化模型对白车身进行轻量化研究具有重要意义。本文以某国产轿车白车身为研究对象,在保证静态弯曲和扭转刚度、一阶弯曲模态频率、一阶扭转模态频率和正面100%碰撞被动安全的前提下,通过优化白车身板件厚度和梁截面形状实现轻量化。……
