非正态分布数据的过程能力分析方法
2017-07-12王雪情
王雪情
摘要:非正态过程能力分析的方法的研究一直以来广受关注。简要介绍了三种不同的计算非正态数据的过程能力指数的方法后,针对现有研究的不足,分别使用三种不同的方法计算过程能力指数,然后根据计算结果做出了分析和比较,最后将得到的结论应用到实际中进行分析,研究表明:虽然进行非正态分布数据的过程能力分析的方法很多,但是正态性转换的方法不具有稳健性,而非参数的方法的精度虽然不高,但对任何一种分布都是可以使用的。
Abstract: Process capability analysis of the non-normal is becoming an imperative problem. In this paper, three different methods of calculating the process capability index of non-normal data are briefly introduced. Based on the shortcomings of existing research, the process capability index is calculated by three different methods, and then the analysis and comparison are made according to the calculation results. Finally, the conclusions will be applied to the actual analysis. Although there are many ways to estimate process capability of non-normal data, results of the first two ways is not robust. Meanwhile, the parameters are not limited to any kind of distributions whose result is low accuracy.
關键词:非正态分布;过程能力指数;Minitab
Key words: non-normal distribution;process capability index;Minitab
中图分类号:F224.0 文献标识码:A 文章编号:1006-4311(2017)19-0209-05
0 引言
过程能力指数(Process Capability Index,PCIs)是用来度量过程能力的相对高低。它开始是由朱兰提出的,是用公差范围和过程能力的商值表示,可以用来估计任何时间的过程能力指数[1]。但是过程能力分析一般要求数据服从正态分布。但是搜集的数据并不都服从正态分布,所以对于非正态分布数据的过程能力分析变成了一个棘手的问题。
本文介绍了三种不同的计算方法,并对比分析了它们的优劣性,并通过实际案例的分析验证了该结果的有效性。本文是通过Minitab软件来辅助分析的。
1 非正态分布数据的过程能力计算方法
1.1 Box-Cox转换法
此方法使用方便、原理简单。但是它仅适用于正数据,当存在有负数据或者0的时候,对原始数据的进行处理,做加法变化,使样本数据全部为正,才能使用此方法。同时Box-Cox转换法还要求对于转换后的数据再次进行正态性检验,有可能转换后的数据仍然不符合正态分布,那么就不能够使用此方法,需要选择另外的方法。……
