APP下载

隧道Ⅴ级围岩喷射混凝土衬砌厚度数值分析

2017-05-10郑跃潼

价值工程 2017年13期

郑跃潼

摘要:喷射混凝土作为新奥法施工的三大必须手段之一,对洞室围岩起到支护的作用,其中喷射混凝土衬砌的厚度对围岩支护效果影响较大。本文针对公路隧道Ⅴ级围岩进行UDEC数值模拟,分析不同喷层厚度对围岩稳定性的影响。结果表明,对于Ⅴ级隧道围岩,要采用钢拱架、钢筋网、锚杆和喷射混凝土联合支护,且喷射混凝土厚度为25cm时,支护效果最好。研究结果为隧道初期支护施工设计提供了科学依据和参考。

Abstract: As one of three essential means of the new Austrian method constructional, the shotcrete construction plays a supporting role in the surrounding rock, and the shotcrete lining thickness has a great effect on the supporting effect of the surrounding rock. The UDEC numerical simulation for Class-V surrounding rock in tunnels is taken to analyze the influence of different shotcrete thickness on the stability of the surrounding rock. The results show that for Class-V surrounding rock in tunnels, when using the steel arch, steel mesh, bolt and shotcrete for combined support and shotcrete thickness is 25cm, the supporting effect is best. The results provide scientific basis and reference for initial supporting construction design of the tunnel.

关键词:喷射混凝土;衬砌厚度;数值分析;围岩稳定;联合支护

Key words: shotcrete;lining thickness;numerical analysis;stability of surrounding rock;combined support

中图分类号:U452.1+2 文献标识码:A 文章编号:1006-4311(2017)13-0150-03

1 UDEC简介

基于牛顿第二定律建立起来的剛体离散单元法在1971年提出之初主要用在岩石边坡运动的分析和研究中,之后又推广应用到准静力或动力条件下节理系统或块体集合的力学研究中。假设块体为准刚度体,节理或弱面控制影响着块体的运动。将节理岩体看作由裂隙切割的非连续介质,相互切割的裂隙将岩体分成相互独立的块体单元,单元之间可以看成是角-角接触、角-边接触或边-边接触。块体间的边-边接触可分解为由两个角-边接触而成,并且随着单元的平移和转动,允许调整各个单元之间的接触关系,最终块体单元可能达到平衡状态,也可能一直运动下去。

离散单元法可以对由不同块体构成的整体进行应力、应变的分析计算,各不同块体之间通过接触点的耦合作用实现连接。目前许多类型的岩体,在构造弱面的强度和刚度都不及岩石本身,基于这点来看,为了排除更多具有不确定性(自由度)的研究对象,一般都将各不同岩石块体假设为刚性,则各接触点或接触面发生的变形就是决定结构位移总量的主要因素。……

登录APP查看全文