基于Ad Hoc的微震监测数据传输系统设计
2017-01-19张法全王泰麟叶金才黄桂强王国富
张法全 王泰麟 叶金才 黄桂强 王国富
摘 要: 微震监测网络具有节点间距大、分布范围广、数据量大的特点,其数据传输方式仍以有线传输为主,存在线缆铺设困难和成本高等问题。设计基于Ad Hoc的微震监测数据传输系统,利用远距离无线网络模块和Ad Hoc技术,结合AODV无线路由协议,在无需其他基础设施的情况下即可实现数据的多跳转发,从而实现整个网络的数据传输。实验结果表明,该系统布置灵活方便、成本低,同时具有传输时延短、数据传输速率高的特点。
关键词: 微震监测; 数据传输; Ad Hoc; AODV
中图分类号: TN931+.3?34; TN92 文献标识码: A 文章编号: 1004?373X(2016)24?0128?04
Design of microseismic monitoring data transmission system based on Ad Hoc
ZHANG Faquan1, WANG Tailin1, YE Jincai1, HUANG Guiqiang2, WANG Guofu1
(1. School of Information and Communication, Guilin University of Electronic Technology, Guilin 541004, China;
2. Geological Survey Institute of Guangxi Zhuang Autonomous Region, Nanning 530023, China)
Abstract: The microseismic monitoring network has the characteristics of wide node spacing, wide distribution and large volume of data, whose the main way of data transmission is still wire transmission that will result in cable laying difficulty and high cost. Therefore, a microseismic monitoring data transmission system based on Ad Hoc is designed in this paper, in which a remote wireless module, Ad Hoc technology and AODV(Ad hoc on?demand distance vector) wireless routing protocol are used to complete multi?hop data forwarding in the case of no other infrastructure, and achieve the network data transmission. The application result shows that the system can be arranged flexibly and has the characteristics of low cost, short transmission time delay and high transfer rate.
Keywords: microseismic monitoring; data transmission; Ad Hoc; AODV
现有的针对矿区工矿活动的微震监测系统具有网络节点多、节点分布范围广、数据量大的特点,其数据传输还主要采用有线的方式[1],但这种方式在矿区往往面临着布置不方便、成本高的问题。因此本文设计了一种远距离无线网络模块,并在此基础上设计了基于Ad Hoc的微震监测数据传输系统。
1 系统概述
Ad Hoc网络是一种多跳的、无中心的、自组织无线网络,整个网络没有固定的基础设施,每个节点都是可以移动的,并且能够以任意方式动态地与其他节点保持联系[2?3]。网络中各节点地位平等,拓扑可变,节点的移动、加入和退出并不会影响整个网络的正常工作。当节点需要与其通信覆盖范围之外的节点进行通信时,将借由中间节点进行多跳转发,各节点将兼任路由器的角色。因此,本文拟将Ad Hoc网络应用于数据传输系统,其系统模型如图1所示。……
