APP下载

响应面法优化稻草厌氧发酵工艺研究

2016-10-14袁小利向天勇袁铁英杨志勇

安徽农业科学 2016年9期

袁小利 向天勇 袁铁英 杨志勇

摘要[目的]研究采用响应面法优化稻草厌氧发酵工艺。[方法]利用中心组合试验设计,考察总固体(TS)含量、发酵温度、尿素添加量对稻草厌氧发酵的影响,采用响应面分析方法对工艺参数进行优化。[结果]根据试验数据建立的二次多项式数学模型极显著,相关系数R2=0.968 4,说明预测值和试验值之间拟合度较好。通过模型预测得到稻草厌氧发酵产沼气的最优工艺组合为总固体含量637%,发酵温度32.64 ℃,尿素添加量4.28%,预期可能最大单位TS产气率236.60 mL/g,试验值为241.00 mL/g,二者相对偏差为182%。[结论]利用响应面法优化稻草厌氧发酵工艺参数可行,可以较好地预测单位TS产气率。

关键词 稻草;响应面;厌氧发酵;沼气产气率

中图分类号 S216.4 文献标识码 A 文章编号 0517-6611(2016)09-081-03

Abstract[Objective]The aim was to optimize rice straw anaerobic fermentation technology by using response surface methodology.[Method]The effect of total solid content, fermentation temperature and urea concentration on the anaerobic fermentation of rice straw was investigated by BoxBenhnken Design experiment. The process parameters were optimized by response surface methodology (RSM).[Result]The results showed that the quadratic regression mathematics model established according to experimental data had highly significant, in which the correlation coefficient R2 was 0.968 4, which illustrated that the predicted value fit the experimental value very well. The optimum process parameters of anaerobic fermentation of rice straw was obtained through the model, which were as follows: the 6.37% of total solid content, 3264 ℃ of fermentation temperature, 4.28% of urea concentration, the predicted biogas yield was 236.60 mL/g, the experimental value was 241.00 mL/g, and the relative deviation was 1.82%.[Conclusion]It is feasible and reliable that the response surface methodology (RSM) could be used for optimizing the rice straw anaerobic fermentation process, and could well predict the biogas yield.

Key words Rice straw;Response surface methodology;Anaerobic fermentation; Biogas yield

農作物秸秆是一种重要的富含有机质的生物质能源[1],其重要的利用途径是通过厌氧发酵将生物质转化为清洁能源沼气,以实现农业废弃物的资源化利用。但在实际生产中,要达到产气率高且最大限度地提高秸秆原料利用率的目的,仍需对产气的影响因素进行分析[2]。

目前,国内外学者对农作物秸秆厌氧发酵产沼气进行了大量研究[3-7],但对响应面法优化厌氧发酵工艺的研究尚不多见。响应面法(Response Surface Methodology,RSM)是数学方法和统计方法结合的产物,是一种优化反应条件和加工工艺参数的有效方法[8]。该方法通过一系列确定性试验,采用多项式函数拟合因素与响应值之间的函数关系,通过分析回归方程寻求最优工艺参数,是一种比单因素分析方法更有效的统计方法[9-10]。……

登录APP查看全文