APP下载

支持向量机在预测配煤灰熔点中的应用

2016-01-26林德平

电力科学与工程 2015年8期

林德平

(山西鲁晋王曲发电有限责任公司,山西潞城047500)

支持向量机在预测配煤灰熔点中的应用

林德平

(山西鲁晋王曲发电有限责任公司,山西潞城047500)

摘要:采用支持向量机预测配煤灰熔点时,针对训练样本代表性不足的问题,提出了一种选取训练样本的方法。在国内具有代表性的煤灰成分和灰熔点数据库的基础上,分别添加现场实际中不同数量的灰熔点实验数据,将二者的集合作为训练样本集对灰熔点进行预测,并对预测结果进行分析。结果表明:训练样本的选取对支持向量机的预测结果有较大的影响,而向数据库中添加灰熔点实验数据可以有效改善训练样本代表性不足的问题,配煤灰熔点预测值的均方误差MSE=5.76,最大相对误差为6.91%。

关键词:配煤;灰熔点;支持向量机;预测;训练样本

中图分类号:TQ533.9

文献标识码:A

DOI:10.3969/j.issn.1672-0792.2015.08.012

收稿日期:2015-05-25。

作者简介:林德平(1974-),男,工程师,主要从事燃煤机组运行、调试工作,E-mail:c211205@163.com。

Abstract:In order to improve the training sample representativeness in predicting the ash fusion temperature (AFT) of blended coals by support vector machine (SVM), a new method of sample selecting was proposed. A new training group was established by adding different experimental data to a representative database and this group was used to predict AFT of coal blending. The results show that the selection of training sample plays a significant role in predicting results, that the new training group could improve the representativeness of training samples, and that the MSE of the predicted value equals 5.76 with the maximum error percentage being 6.91%.

Keywords:coal blending;ash fusion temperatures;support vector machine;prediction;training sample

0引言

在煤种复杂多变,安全高效生产和国家政策的多重压力下,国内越来越多的燃煤电厂采用了配煤掺烧技术,而配煤的结渣特性与机组的安全运行有着紧密的联系[1]。配煤的灰熔点,尤其是软化温度ST,在影响锅炉结渣的因素中代表了煤灰本身的特性,该指标不仅与其结渣特性息息相关,更是固态排渣锅炉的重要安全指标之一[2]。本厂因为经济性和环保性的原因燃用的是烟煤和贫煤的配煤,且燃用的煤种来源于周边的二十几个煤矿,各个煤种的煤质指标有所差异。……

登录APP查看全文