APP下载

风速风向仪设计中互谱插值算法的应用

2014-06-28曲振林,陈晓

湖北农业科学 2014年7期

曲振林,陈晓

摘要:为解决传统风速风向仪测量精度不高的问题,设计了一种基于时差法的超声波风速测量仪。利用互相关算法实现超声波渡越时间差估计,并通过互谱插值来提高估计精度,仿真结果表明,与互相关算法相比,互谱插值算法对时间差的估计精度更高。根据FPGA器件特性,运用Verilog HDL语言编程,采用自顶向下的设计方法,实现了整个测量系统的设计。

关键词:超声波;时延估计;互谱插值;FPGA

中图分类号:TP274+.5 文献标识码:B 文章编号:0439-8114(2014)07-1671-04

Cross-spectral Interpolation Algorithm Based Designs of Anemometer

QU Zhen-lin,CHEN Xiao

(College of Electronic & Information Engineering, Nanjing University of Information Science & Technology, Nanjing 210044, China )

Abstract: In order to solve the problems of the low measurement sensitivity of traditional anemometer, a new method based on the ultrasonic transit-time wind speed measurement was proposed. The cross-correlation algorithm was used to estimate the transit time difference, and to improve the estimation accuracy by cross-spectral interpolation. Results showed that compared with the cross-correlation algorithm, cross-spectral interpolation algorithm had more accurate delay estimation. According to the characteristics of FPGA device, the design of the entire measurement system were achieved with the use of Verilog HDL language programming, top-down design methods.

Key words: ultrasonic;delay estimation; cross-spectral interpolation; FPGA

随着科学技术的发展,风速风向测量在许多领域发挥着愈来愈重要的作用。风矢量测量仪器发展迅速,测量手段与方法日益丰富。风矢量的测量常用的有风杯风速仪[1],它成本低,使用方便,但是响应速度慢,适合精度要求较低的场合;皮托管风速仪[2]结构简单、制造方便、价格便宜,但是它属于单点、定常的接触式测量,低风速段灵敏度低;热线热膜风速仪[3]具有体积小,对风场干扰小,稳定可靠等优点,但是它属于接触式测量,探针会对流场中气流的流动产生一定扰动。激光多普勒测速仪[4]空间分辨率高,能满足点测量的要求,但是其测量系统的组成较为复杂,价格昂贵成本高。

超声波风速风向测量方法[5,6]因为属于非接触式测量,所以没有干扰风场,无压力损失,没有机械转动,不存在机械磨损,也没有机械惯性,故灵敏度高,输出特性为线性,易于风速值的计算及数字化输出。为此,采用超声波时差法进行风速风向的测量,设计3对超声波探头,分别对3个方向上的风速进行测量,利用互相关算法实现时延估计,并通过互谱插值提高时延估计精度,然后根据公式计算得到每一个方向的风速分量,最后经过合成得到该时刻的风速风向值。……

登录APP查看全文