嵌入式壁挂安装装置结构设计
2019-08-07李家宝
李家宝
【摘 要】本文进行了一种嵌入式壁挂安装装置结构设计,该装置一部分嵌入在墙体中,利用固定杆连接;安装结构包括转动设置的第一转动盘和第二转动盘,第一转动盘和第二转动盘上设置有支架;第一转动盘上固定有第一齿轮,第二转动盘上固定有与第一齿轮外啮合的第二齿轮;壁挂安装装置还包括电机,电机用于驱动第一齿轮或第二齿轮转动,进而带动第一转动盘和第二转动盘转动。通过第一转动盘和第二转动盘在预定的轨道上滑动,带动支架向前或向后移动从而调节电视与观看者的相对距离。
【关键词】壁挂安装;结构设计;机构
中图分类号: TM925.05文献标识码: A文章编号: 2095-2457(2019)17-0018-002
DOI:10.19694/j.cnki.issn2095-2457.2019.17.007
Structural Design of Embedded Wall Hang Installation Device
LI Jia-bao
(Anhui University of Science and Technology School of mechanical Engineering,Huainan Anhui 232001,China)
【Abstract】This paper has carried out a structural design of an embedded wall mounting device.The device is partially embedded in the wall and connected by a fixed rod.The mounting structure comprises a first rotating disk and a second rotating disk which are arranged in rotation,the first rotating disk and The second rotating disc is provided with a bracket;the first rotating disc is fixed with a first gear,and the second rotating disc is fixed with a second gear externally meshing with the first gear;the wall mounting device further comprises a motor,and the motor is used for driving A gear or a second gear rotates to drive the first rotating disk and the second rotating disk to rotate.By sliding the first rotating disk and the second rotating disk on a predetermined track,the bracket is moved forward or backward to adjust the relative distance between the television and the viewer.
【Key words】Wall hang installation;Structure design;Mechanism
现有技术中,普通家用电器中,以平板显示器为例,当安装在墙壁时往往不能动,即便后来出现了有可以使平板显示器能转动的支撑架,但由于美观要求的缘故可能安装的空间及与墙壁的距离不能过大,因此支架只能是围绕平行于墙壁的水平轴或竖直轴进行非常有限的小角度的转动,且不能够调整其轴心线与墙面之间的距离,导致人看电视时如果所在位置离电视远一些或者偏一些或者视力不好,不能够很舒服很清晰很方便的通过调整观看电视的距离及观看角度而造成体验感变差。此外,还有个问题是现有技术大多角度调整需要人到电视跟前去调整很麻烦,比如人躺在沙发上或床上懒得动时,希望能够通过遥控器就可以控制,但现有技术还不能解决这个问题,因此一种能够远端控制显示器与观看人之间距离的装置存在着需求。……
