APP下载

精密频率与相位调整方法

2018-04-04王超李世光夏振华于航党明朝毛新凯

现代电子技术 2018年7期

王超 李世光 夏振华 于航 党明朝 毛新凯

摘 要: 精密频率与相位调整技术是守时系统的关键技术。利用直接数字频率合成(DDS)引入精密频率与相位调整量,通过锁相环将DDS输出锁定于本地恒温晶振OCXO,在锁相环中通过分频和两级频差倍增提升频率和相位调整分辨率,环路锁定后的OCXO输出即频率和相位精密微调后的信号。设计了基于相位比对的频率和相位调整分辨率测试系统,实验结果表明,精密频率与相位调整系统的频率调整分辨率达到了4×10-17,相位调整分辨率达到了6 fs。

关键词: 守时系统; 直接数字频率合成; 频差倍增; 频率与相位调整; 相位比对; 锁相环

中图分类号: TN98?34; P127.1+2 文献标识码: A 文章编号: 1004?373X(2018)07?0125?05

Precision frequency and phase adjustment method

WANG Chao, LI Shiguang, XIA Zhenhua, YU Hang, DANG Mingzhao, MAO Xinkai

(Beijing Institute of Radio Metrology and Measurement, Beijing 100039, China)

Abstract: The precision frequency and phase adjustment method is a key technology of time keeping system. The direct digital synthesizer (DDS) is used to introduce the precision frequency and phase adjustment amount. The output of DDS is locked at oven controlled crystal oscillator (OCXO) through phase locked loop (PLL). A frequency divider and a two?stage frequency difference multiplication are utilized in PLL to improve the frequency and phase adjustment resolution. The output of the OCXO after PLL locking acts as the signal after frequency and phase precise adjustment. The test system based on phase comparison was designed for frequency and phase adjustment resolution. The experimental results show that the frequency adjustment resolution of the system can reach up to 4×10-17, and the phase adjustment resolution can reach up to 6 fs.

Keywords: time keeping system; DDS; frequency difference multiplication; frequency and phase adjustment; phase comparison; phase locked loop

0 引 言

1955年英國国家物理实验室铯束原子钟的研制成功,正式标志着人类的时间标准进入原子时代。经过60年的发展,原子钟的准确度已由最初的1×10-9提高到目前的1×10-18,使原子钟成为保持时间最好的工具[1]。目前,全球70余个守时实验室的400多台原子钟保持着协调世界时(Universal Time Coordinated,UTC)[2],各实验室通过GPS共视或卫星双向时频传递(Two Way Satellite Time And Frequency Transfer,TWSTFT)的方法[3?6],将时间比对数据发送给国际计量局(Bureau International Des Poids Et Mesures,BIPM),从而得到本地守时钟组保持的时间UTC(k)与UTC的时间偏差。

守时钟组通常由多台氢钟和铯钟组成,由于存在环境变化、元件老化等原因,原子钟存在一个长期漂移率[7?8],从而引起守时误差逐渐变大。为了克服本地时间UTC(k)的时间偏差,需要对守时原子钟的频率和相位进行精密微调,以抵消钟漂和钟差[9?12]。守时原子钟工作……

登录APP查看全文