APP下载

斜拉桥合理成桥状态计算的荷载分项系数法

2017-11-04戚斌王雷

中华建设科技 2017年9期

戚斌 王雷

【摘 要】斜拉桥合理成桥状态确定方法的实质是找出一组斜拉索索力,使结构体系在既定荷载作用下,某种反映受力性能的目标达到最优;本文引入荷载系数的概念,建立受调向量和施调向量之间的矩阵关系表达式,并考虑施工全过程,采用正装迭代法反复迭代计算来确定斜拉桥的成桥索力及成桥状态;算例表明,本文方法具有概念明确、收敛速度快的优点。

【关键词】斜拉桥;索力优化;荷载系数;影响矩阵;正装迭代法

Load Partial Coefficient Method for Reasonable Bridge State Calculation of Cable - Stayed Bridge

Qi Bin1,Wang Lei2

(1.Bengbu City Traffic Infrastructure Construction Quality Supervision Bureau Bengbu Anhui 233001;

2.Anhui Vocational and Technical College of Communications Hefei Anhui 4100761)

【Abstract】The essence of the method of determining the bridge shape of the cable-stayed bridge is to find out a set of cable-stayed forces, so that the structure of the structure under the action of a certain load, a certain performance reflects the target to achieve the optimal; this paper introduces the concept of load factor, In this paper, the method has the advantages of the relationship between the vector and the vector, and considering the whole process of construction. The iterative calculation is used to determine the bridge force and bridge state of the cable-stayed bridge. The concept of clear, the advantages of fast convergence.

【Key words】Cable - stayed bridge;Cable force optimization;Load factor;Influence matrix

1. 研究背景

(1)斜拉桥是高次超静定结构,在施工结束后,整个结构在恒载作用下的应力(内力)状态和几何线形需要满足设计图纸的要求,这就是所谓的合理成桥状态。由于斜拉桥索力具有可调性,可以通过调整斜拉索索力来优化斜拉桥结构的受力,因此斜拉桥合理成桥状态确定方法的实质是找出一组斜拉索索力,使结构体系在既定荷载(一般为恒载)作用下,某种反映受力性能的目标(荷载效应)达到最优。

(2)斜拉桥受力性能的好坏并不能仅用单一的目标函数来表示,工程界期望在斜拉桥索力优化过程中,既能分别得到不同目标函数、不同加权的优化结果,又能计入预应力、活载、收缩徐变、约束优化等影响,供设计者进行比选。

(3)国内外诸多文献[1~4]采用无约束的弯曲能量最小法和弯矩最小法来确定合理成桥状态,这些方法的優点是对于成桥状态给出了便于数学表达的目标函数(约束条件),但还只适用于恒载索力优化,无法考虑活载和预应力的影响,故而成桥索力要进行大范围的调整。……

登录APP查看全文