APP下载

基于遗传算法优化BP神经网络预测CO2/H2S环境中套管钢的腐蚀速率

2017-10-11万里平徐友红冯兆阳

腐蚀与防护 2017年9期
关键词:模型

万里平,徐友红,冯兆阳,孔 斌,杨 兵

基于遗传算法优化BP神经网络预测CO2/H2S环境中套管钢的腐蚀速率

万里平1,徐友红1,冯兆阳1,孔 斌1,杨 兵2

(1.西南石油大学油气藏地质及开发工程国家重点实验室,成都610500;2.大庆石油管理局松原机械总厂,松原138000)

基于CO2/H2S共存腐蚀环境的复杂性、危险性,以及两者协同与竞争效应的不确定等原因,套管钢在CO2/H2S共存腐蚀环境中腐蚀速率测试存在试验时间长、误差较大且存在不安全隐患等缺陷,现有的单一腐蚀速率预测模型不能满足这方面的研究。利用建立的遗传算法优化BP神经网络模型分别对不同温度、不同CO2分压和不同H2S分压条件下套管钢的腐蚀速率进行预测。与单纯的BP神经网络模型预测相比,遗传算法优化BP神经网络训练收敛速率有所增加,预测效果得到改善;遗传算法优化BP神经网络预测值与实测值吻合较好,此预测模型可靠性很强;该方法为我国高酸性气田开发中快速获取腐蚀速率数值提供了一条新的思路。

遗传算法;酸性气田;腐蚀速率;BP神经网络;H2S腐蚀

Abstract:Due to the complexness,riskiness and uncertainty of coordination and synergic effect of corrosion in CO2/H2Senvironment,the corrosion rate testing of casing steel needs a long time test and shows relatively large error and existence of hidden dangers in CO2/H2Senvironment,and the existing single corrosion rate prediction model cannot meet the demands in the research.The established model of BP artificial neural network optimized by genetic algorithm was used to test the corrosion rates at different temperature,CO2pressure and H2S pressure.Compared to the BP neural network,the BPartificial neural network optimized by genetic algorithm increased the convergence rate of train and improved the effect of forecast,and the values from both prediction and actual measurement of BP artificial neural network optimized by genetic algorithm were in good agreement.This model also had a strong reliability.This method provides us a new way to acquire the figure of the corrosion rates fast in high acidy oil-gas field.

Key words:genetic algorithm;sour gas field;corrosion rate;BP neural network;H2S corrosion

CO2/H2S腐蚀是石油天然气工业中常见的腐蚀类型,也是目前腐蚀与防护领域中重要的研究课题。影响CO2/H2S腐蚀速率的因素很多,如CO2/H2S分压、温度、p H、压力、矿化度、时间以及材质等[1-3]。目前,已有的模型多聚焦于H2S致开裂,而H2S单独作用对腐蚀速率影响的模型较少[4]。此外,有关CO2单独作用对腐蚀速率影响的模型较多。Shell公司的De Waard 95模型[5]将腐蚀环境温度、介质流速、p H等影响因素融入模型,但在高温和高p H条件下预测的腐蚀速率比实测值稍大;……

登录APP查看全文

猜你喜欢

模型
一半模型
一种去中心化的域名服务本地化模型
适用于BDS-3 PPP的随机模型
函数模型及应用
p150Glued在帕金森病模型中的表达及分布
函数模型及应用
重尾非线性自回归模型自加权M-估计的渐近分布
3D打印中的模型分割与打包
FLUKA几何模型到CAD几何模型转换方法初步研究
一个相似模型的应用