重大危险源评估方法探讨
2017-09-16徐刚
摘 要:本文主要通过重大危险源情况的调查分析,探讨重大危险源的评估思路和评估方法,通过分析比较,对可能发生重大人员伤亡、重大财产损失的火灾、爆炸、毒害等灾害事故的场所或设施确定的重大危险源。通过评估,进一步明确本地重大危险源分布情况、城镇公共消防设施现状和灭火救援力量,从而推动政府加快完善城镇消防规划,加强消防基础建设,切实提高多种形式消防队伍为经济社会发展服务的能力,并积极推动社会联动机制的建立。
关健词:重大危险源; 评估方法; 探讨
Major hazard source evaluation
Xu Gang
( Guizhou province Qiandongnan police fire brigade command, Guizhou Kaili 556000 )
Abstract: this article mainly through the major hazard survey and analysis, discussed major hazard assessment method and assessment methods, through analysis and comparison, the possible significant casualties, major property damage fire, explosion, poisoning and other accidents premises or facilities identified significant dangerous source. Through the evaluation, further define the major danger source distribution, urban public fire protection facility status and fire-fighting and rescue forces, thus promoting the government to accelerate the improvement of fire protection planning of cities and towns, strengthen fire infrastructure, improve the multiform firefighting team for the economic and social development services, and actively promote the establishment of social linkage mechanism.
Key words: major hazard; assessment method; discussion
方法确定思路:将各单位内危险源的危险情况与该单位区域灭火救援能力进行量化计算,其后进行比较,取得一定的比值,根据比值的大小,确定该单位是否为危险源。如单位存在的危险源的危险情况低于区域灭火救援能力,即定为非危险源;如超过,定为危险源;如比值相当大,即为重大危险源,下面作详细表述。
选用参数
1.危险程度(X)
对单位存在同类危险源,危险程度考虑该危险源的最大值;对存在多种危险源的,需对多种不同的危险源进行分别计算,比较后取其最大值。
单位的危险源种类甚多,根据消防作战的对象,按其物体的性质,分为可燃固体、易燃液体、压缩和液化气体三种。单位的危险程度就以此为计算对象,分别计算其存在的三种形态的物质的危险程度,确定分值。
计算时,取值的基准为按国家标准配备相关人员、装备和设施的单个标准型普通消防站的灭火救援能力(E)。……
