2024铝合金零件T62热处理工艺及组织性能研究
2017-05-31赵钊冯朝辉
赵钊+冯朝辉



摘要:
2024-O铝型材成形后,需要进行热处理才能达到最终的T62状态.合适的热处理工艺参数会得到性能较理想的最终型材,但是热处理工艺的最佳参数对热处理的工艺控制要求很高,因此很难确定.首先经由2024-O铝型材热处理工艺试验,系统地研究了固溶处理制度、淬火和人工时效制度等工艺因素对合金显微组织和力学性能的影响.其次,采用透射电子显微镜(TEM)和X射线衍射仪(XRD),在微观上研究不同制度下,型材微结构的变化与增强相的析出.最后确定了实验室条件下2024-O状态铝型材T62热处理的最佳工艺参数,即(490~505)℃×(20~40)min+(185~195)℃×(8~14)h.在该制度下,型材合金具备较优的综合性能.
关键词:
2024型材料; T62热处理工艺; 显微组织; 力学性能
中图分类号: TS 912+.3-文献标志码: A
Study on Microstructure and Properties of 2024 Aluminum
Parts by T62 Heat Treatment
ZHAO Zhao1, FENG Zhaohui2
(1.College of Engineering and Applied Sciences, Nanjing University, Nanjing 210023, China;
2.Beijing Institute of Aeronautical Materials, Beijing 100095, China)
Abstract:
In order to get relatively ideal property of T62 state on 2024-O aluminum alloy,it needs to be heat treatment with appropriate parameters after molded.It is not easy to get the optimal parameters from the heat treatment which is still very challenge as it require highly control.In this study,2024-O aluminum alloy was systematically studied on microstructure and mechanical properties under various processing,such as solution temperature,holding time,quenching,and artificial aging system.The microstructure has been changed and the precipitate phase has been enhanced where observed by using TEM and XED.Finally,the alloy with better comprehensive performance was obtained by the confirmed parameters of (490-505)℃/(20-40)min+(185-195)℃/(8-14)h,which is the most suitable parameter for 2024-O aluminum alloy with T62 state inlaboratory condition.
Keywords:
2024-O aluminum alloy; T62 heat treatment; microstructure; mechanical property
2024鋁合金广泛应用于航空、航天、雷达等高科技产品的制造[1-4],而且目前在科研领域,2024铝合金材料的组织、第二相析出、性能的热处理形成规律的研究也取得了较多的成果[5-7].在工业生产领域中,形状复杂的2024铝合金航空零件一般会采用O状态材料,之后热处理至T62状态[2].研究使用何种热处理制度可得到最佳综合性能的铝合金型材,一直是工程技术领域的研究重点[8-9].2024-T62铝合金零件的热处理方式,主要由固溶淬火与人工强制时效两个步骤组成,这两个步骤涉及大量影响第二相析出的因素[10-14],从而导致了性能的变化[15-16],因而2024-T62铝合金零件热处理的第二相析出及性能会随着这些因素的变化而有规律地改变.研究2024-T62零件热……
