沥青双层摊铺设备及施工特点
2017-02-05邱丽鹏
邱丽鹏
摘要:通过对双层摊铺设备及双层排水沥青路面施工特点的分析,为保持上面层超薄结构以及两层之间的透水性,进行“热对热”双层一体摊铺工艺。结果证明:双层沥青摊铺设备在一般的粘结层加磨耗层沥青结构路面施工中,可以增厚粘结层、减薄磨耗层,提高抗车辙能力及两层之间的粘结力,不用喷洒粘层油,节约材料成本,是值得推广的一种施工工艺。
关键词:沥青双层摊铺;摊铺设备;热对热;施工工艺
中图分类号:U416.217文献标志码:B
Abstract: By means of the analysis of hotonhot paving machine and the characteristics of porous asphalt pavement, the hotonhot paving technology was applied in view of the ultrathin upper layer and interlayer water permeability. The results show that by introducing the hotonhot paving machine, the binding course can be thickened, while the wearing course is thinner; both the rut resistance and the interlayer adhesion are enhanced; the technology saves material cost since it has no need of tack coat.
Key words: hotonhot paving; paving machine; hotonhot; construction technology
0引言
沥青路面的双层摊铺,在国外也叫“热对热”摊铺("hot on hot" paving),国内称为“双层一体摊铺”[1]。这种沥青路面摊铺技术,最早由一位德国教授在1993年申请专利。德国戴纳派克公司和德国福格勒公司分别研制出具有双层摊铺施工工艺的沥青摊铺设备。中国于2007年引进一套沥青路面双层摊铺设备,在承平二级公路和张石、石黄高速公路的大修工程,西商、西三等新修高速公路、浏醴高速公路18标段的试验路段的沥青面层摊铺施工,完成了近100 km路段的施工作业,效果令人满意,引起了全国各地公路建设施工人员的极大关注。2011年,双层沥青摊铺工艺技术获得了中国公路学会科技进步三等奖。沥青路面双层摊铺由于能节省材料和减少人员的投入,是值得推广的一项施工工艺。
1双层摊铺的技术特点
从传统的沥青路面摊铺与双层一体摊铺沥青路面结构对比可以看到(图1),传统沥青路面是分层摊铺,逐层压实,并在两层之间喷洒一层粘层油。……
