APP下载

基于核典型相关分析的非线性相关源盲分离方法研究

2016-01-12李志农,张芬,肖尧先

振动与冲击 2015年5期

第一作者李志农男,博士,教授,1966年生

基于核典型相关分析的非线性相关源盲分离方法研究

李志农,张芬,肖尧先

(南昌航空大学无损检测技术教育部重点实验室,南昌330063)

摘要:针对传统的相关源盲分离方法的不足,提出了一种基于核典型相关分析的非线性相关源盲分离方法。该方法是利用了核方法来处理数据之间的非线性问题,同时还利用信号源之间的相关性来进行分离。提出的方法与传统的相关源盲分离方法进行对比分析。仿真结果表明,提出的方法明显优于传统的相关源盲分离方法,并从分离性能指标上得到了充分的反映。最后,将该方法应用到转子不对中和碰摩故障的盲分离中,实验结果进一步验证了该方法的有效性。

关键词:核典型相关分析;盲源分离;相关源;非线性混合

基金项目:国家自然科学基金(51075372,50775208, 51265039);江西省教育厅科技计划项目(GJJ12405);湖南科技大学机械设备健康维护湖南省重点实验室开放基金(201204);江西省研究生创新基金项目(YC2013-S214)

收稿日期:2013-11-08修改稿收到日期:2014-03-27

中图分类号:TH17; H165+.3; TN911.7; TP206+.3文献标志码:A

Blind separation for nonlinear mixture of correlated sources based on kernel canonical correlation analysis

LIZhi-nong,ZHANGFen,XIAOYao-xian(Key Laboratory of Nondestructive Testing, Ministry of Education Nanchang Hangkong University, Nanchang 330063, China)

Abstract:Based on the deficiency in the traditional blind separation method of statistically correlated sources, a new blind separation method of nonlinear mixture from correlated sources is proposed. In the proposed method, the nonlinear problem between the data is processed using the kernel method, and the correlated sources is effectively separated using the correlation of source signals. The proposed method is compared with traditional blind separation method of statistically correlated sources. The simulation results show that the proposed method is obviously superior to the traditional blind separation method of correlated sources, and the effectiveness of separation has been fully reflected with the performance index of separation. Finally, the proposed method has been applied in blind separation of the misalignment of rotary and rotor rub-impact, the experiment results further verify the effectiveness of the proposed method.

Key words:kernel canonical correlation analysis; blind source separation; correlated sources; nonlinear mixture

在机械故障源盲分离中,同一零部件在来自不同激励下引起的响应可能因为存在交叉的频率成分而不满足源信号的统计独立性假设,使得各源信号具有很大的相关性。目前,现有的传统的故障源分离方法对这些相关振源的分离无能为力,因为传统的机械故障源分离方法要求源信号满足统计独立性的假设条件,而这在工程应用中往往并不满足。……

登录APP查看全文