APP下载

气压液体式磨床自动平衡装置控制策略与实验研究

2016-01-12潘鑫,吴海琦,高金吉

振动与冲击 2015年5期

第一作者潘鑫男, 博士生,1987年生

通信作者高金吉男, 教授,中国工程院院士,1942年生

气压液体式磨床自动平衡装置控制策略与实验研究

潘鑫, 吴海琦, 高金吉

(北京化工大学机电工程学院诊断与自愈工程研究中心,北京100029)

摘要:砂轮在线动平衡装置是高速磨床上的重要组成部分。介绍了一种新型的气压液体式在线自动平衡系统,为该平衡系统提供了一种靶向控制策略。该控制策略在平衡装置执行操作前,已经准确定位不平衡量的大小和相位;平衡过程中,系统有确定目标的进行注气操作,系统振动幅值单调下降,平衡过程无错调现象。对注气操作的控制方案进行了定量分析,并选出了最优方案。实验结果表明,在多种转速下,该类平衡装置均可在15 s内有效地降低系统的不平衡振动,且振幅下降比例均在90%以上。

关键词:磨床;自动平衡;气压液体;靶向控制

基金项目:国家重点基础研究发展计划(“973”计划)项目(2012CB026000);国家自然科学基金重点项目(51135001)

收稿日期:2013-10-21修改稿收到日期:2014-02-11

中图分类号:TB123; TB535文献标志码:A

Control strategy and experiment research on liquid-transfer active balancing device by pneumatic means for grinding machines

PANXin,WUHai-qi,GAOJin-ji(Diagnosis and Self-recovering Research Center, Beijing University of Chemical Technology, Beijing 100029, China)

Abstract:Active balancing device of grinding wheel is an important part for high-speed grinding machines. A new type of liquid-transfer active balancing device was proposed and a targeted control strategy was provided for the balancing device. In the strategy, the amplitude and phase of imbalance were determined before the running of balancing device. During the process of balancing, the compressed air was injected to a determinate target, so as to make the amplitude of vibration decrease monotonically without any erroneous regulation phenomenon. Quantitative analysis was done on several control paths and the optimal path was selected. The experiment result demonstrates that the unbalance response can be reduced in 15s under three speed conditions and the decrease in amplitude is more than 90%.

Key words:grinding machine; active balancing; liquid transfer; targeted control

磨削加工技术是先进制造技术中的重要领域。高速及超高速磨削技术能极大地提高生产率和产品质量,降低成本,实现难加工材料和复杂型面的精加工。砂轮高速旋转所产生的不平衡离心力与转速的平方成正比。所以,在高速磨削过程中,即使极小的不平衡质量也会产生非常大的不平衡离心力,造成机床振动,轴承磨损,被磨削工件产生表面波纹和增大表面粗糙度值,严重影响磨床的加工精度和使用寿命[1]。……

登录APP查看全文