APP下载

冷轧管机动平衡配重的分析

2016-01-09李为,纪松山,李小荣等

重型机械 2015年5期

冷轧管机动平衡配重的分析

李为,纪松山,李小荣,曹世奇,凡明

(中国重型机械研究院股份公司,陕西 西安 710032)

摘要:针对中国重型机械研究院股份公司为国内某钢厂提供的LG-15,LG-280冷轧管机,利用MATLAB语言,结合实际工况,对冷轧管机进行了动力学计算分析,提出在不同转速的情况下,通过系数K的变化,合理配置平衡重量,为周期式冷轧管机设计提供了可靠依据。

关键词:冷轧管机;动平衡配重;系数k

中图分类号:TG333文献标识码:A

收稿日期:2015-04-11;修订日期:2015-08-21

作者简介:李为(1968-),男,中国重型机械研究院股份公司高级工程师。

Analysis of the counter weight of dynamic balance for cold pilger mill

LI Wei, JI Song-shan,LI Xiao-rong,CAO Shi-qi,FAN Ming

(China National Heavy Machinery Research Institute Co.,Ltd.,Xi’an 710032, China)

Abstract:China National Heavy Machinery Research Institute Co.,Ltd. provided LG-15,LG-280 cold pilger mill for a domestic steel mills. According to the actual conditions,it used the Matlab software to analyse the counter weight for the cold pilger mill, this paper have proceed the dynamic analysis and calculation for the mill. Under the condition of the different rotating speed, it provided the important of the factor K. According to change the factor K, this paper attained to the rational allocation of the counter weight, it provided reliable basis to design the cold pilger mill.

Keywords:cold pilger mill; counter weight of dynamic balance; factor K

0前言

冷轧管机在每一个工作循环中管坯的截面减少可达70%~85%,具有变形量大、成材率高、表面质量好的特点,而被广泛使用,是获得高精度管材的重要设备。冷轧管机的工作机架借助于曲柄连杆机构作往复直线运动,生产不可避免地产生较大的惯性力,不利于实现高效轧制和提高设备的可靠性。为减小不平衡惯性力引起的附加动载荷和振动,必须进行惯性力的平衡计算,以确定附加平衡重量来消除由于结构特点引起的不平衡。

1机构运动学分析

冷轧管机传动工作原理如图1所示,轧机机架B点的运动参数计算见公式(1)~(7),规定:x,y轴正方向如图,力矩顺时针为负,逆时针为正。

1.轧机机架 2.机架连杆 3.曲轴 4.扇形块 R-曲柄半径;L-连杆长度;e-错距; X-机架位置 图1 曲轴传动机构简图 Fig.1 Crank shaft transmission mechanism diagram

轧机机架B点的位移

x=L×cosβ+R×cosα

(1)

曲柄转角:α=ω×t

(2)

连杆与水平方向夹角

(3)

(4)

由二项式可得

(5)

轧机机架B点的速度

(6)

轧机机架B点的加速度

登录APP查看全文