HX420LAD板材冲压性能研究
2016-01-09郝俊珂,毕大森,李明亮等
HX420LAD板材冲压性能研究
郝俊珂1,毕大森1,2,李明亮1,姜立忠3
(1.天津理工大学 材料科学与工程学院,天津 300384;2. 天津市金属材料高效近净成形技术工程中心,天津 300384;3.天津津兆机电开发有限公司,天津 300384)
摘要:通过单向静载拉伸试验与杯突试验研究了HX420LAD板材的冲压性能,并以某汽车零件为研究对象,通过有限元模拟和实物冲压,分析了该板材的冲压成形性能。结果表明,HX420LAD板材强度较高,属于高强度钢板,有较好的结构稳定性,但其成形极限较低,易出现起皱破裂缺陷。利用有限元模拟和实物冲压的对比试验,为制定出合理的零件冲压成形工艺提供了参考依据。
关键词:HX420LAD板材;冲压成形;单向拉伸;杯突;有限元模拟
中图分类号:TG386文献标识码:A
收稿日期:2015-04-28;修订日期:2015-06-02
作者简介:郝俊珂(1990-),女,天津理工大学材料科学与工程学院硕士研究生。
Research on the formability of steel plate HX420LAD
HAO Jun-ke1,BI Da-sen1,2,LI Ming-liang1, JIANG Li-zhong3
(1.School of materials science and engineering , Tianjin University of Technology, Tianjin 300384,China;
2. Tianjin Engineering Center of Near-Net-Shape Forming Technology for Metallic Materials , Tianjin 300384,China;
3.Tianjin JinZhao Machine &Electronic Development Company Limited, Tianjin 300384,China )
Abstract:The article investigated the basic stamping property of steel plate HX420LAD. Taking the automobile part as the research object, through finite element simulation and physical stamping, the steel plate stamping performance were analyzed. The result indicates that the steel plate has higher strength, belongs to the high strength steel plate, better structural stability. However, its forming limit is low, and wrinkle and rupture is easily happened. Using the finite element simulation and comparing physical stamping experiment, it can be used as reference for the stamping technique of steel plate.
Keywords:HX420LAD steel plate; stamping formability; Uniaxial tensile; cup drawing; finite element simulation.

0引言
汽车工业是我国国民经济五大支柱产业之一。近年来,汽车工业飞速发展,同时也面临三大问题:能源、公害和安全。其中能源问题是汽车工业发展与变革的动力。若汽车车身减薄5%,则可减少4%~5%的燃料消耗。因此,汽车轻量化已成为汽车发展中的关键性研究课题。汽车轻量化材料主要包括:高强度钢板、轻合金和塑料。其中,高强度钢板已广泛应用于汽车车身外覆盖件,车身内覆盖件,保险杠,轮辋和轮辐,车门边梁等。本文以高强度钢板HX420LAD为研究对象,对其冲压成形性能进行研究。
1冲压成形性能试验
试验材料选用厚度为1.1 mm的HX420LAD钢板,其化学成分如表1 所示。……
