2 000 m3高真空(10-3Pa)系统漏率分析和安装工艺控制实践
2016-01-09陆长胜,岳向吉,巴德纯等
2 000 m3高真空(10-3Pa)系统漏率分析和安装工艺控制实践
陆长胜1,岳向吉2,巴德纯2,石教澜3,黄金祥3
(1. 武汉科技大学机械自动化学院 武汉 430081; 2. 东北大学机械工程与自动化学院 沈阳 110819;3. 武汉一冶钢结构有限责任公司 武汉430081;)
摘要:随着科技和科研的需要,真空装备开始向大型化,高真空方向发展。本文针对容积在2 000 m3量级大型高真空系统的安装工艺控制和静态保压漏率进行分析,重点对系统的总装工艺控制过程进行论述,并考虑到在工程实际中的不确定性和查补漏困难的问题,通过对漏率分析,计算材料表面放气等“虚漏”量,提出在高(超高)真空工程设计和建设中一种基于“虚漏”阈值保压指标的计算方法,结果显示满足安装质量要求。
关键词:大型高真空容器;漏率分析;静态保压指标;安装工艺控制
中图分类号:TB74文献标识码:A
收稿日期:2015-04-26;修订日期:2015-05-19
作者简介:陆长胜(1973-),男,硕士,讲师,主要研究方向为真空技术、机械工程、CAD/CAM技术教学与研究等。
Assembly technology and leak rate analyze of 2 000 m3high vacuum vessel
LU Chang-sheng1, YUE Xiang-ji2, BA De-chun2,SHI Jiao-lan3, HUANG Jin-xiang3
(1. Wuhan University of Science and Technology, Wuhan 430081, China;
2. Northeastern University, Shenyang 110819, China; 3.Wuhan Yi Ye Steel Structure CO., LTD, Wuhan 430080,China)
Abstract:Vacuum equipment goes toward large scale and high vacuum nowadays. This essay analyses the assembly technology and static leak rate of large scale high vacuum vessel of 2 000 m3 volume. Considering the problem of uncertainty and difficulty of leak-checking in the project, this essay lays stress on the assembly technology of the system, calculates the virtual leak of material surface deflation and puts forward to the calculation method on the basis of keeping pressure index of virtual leak threshold in the design of high (ultra-high) vacuum project design and construction.
Keywords:large-scale high vacuum vessel; leak rate analyses; static pressure- keeping ; assembly technology

0前言
四川某科研试验新区二期工程中与低密度风洞配套的设备——高真空系统,其设备包括2 000 m3真空球罐、真空管道、阀门、高真空泵组等,其中2 000 m3真空球罐是目前国内单体容积最大、极限负压最低的高真空球罐,同时系统要求按照“最小压升率指标考核系统的静态密闭性”。由于该系统庞大,90%以上设备需现场拼装;加之,真空度要求高,对泵组、阀门的安装精度和密闭性要求特别高,所以对焊接质量、现场安装提出了高要求。
1系统漏率分析和静态保压指标的计算……p>
