APP下载

污水污泥高温热解残渣孔隙结构特性分析

2015-02-19郑小艳胡艳军任建莉钟英杰

浙江工业大学学报 2015年2期

郑小艳,胡艳军,严 密,任建莉,钟英杰,孟 晟

(浙江工业大学 能源与动力工程研究所,浙江 杭州 310014)

污水污泥高温热解残渣孔隙结构特性分析

郑小艳,胡艳军,严密,任建莉,钟英杰,孟晟

(浙江工业大学 能源与动力工程研究所,浙江 杭州 310014)

摘要:采用管式炉开展了不同含水量污水污泥高温热解制取残渣试验,通过ASAP 2020型物理吸附仪测定了污泥热解残渣的比表面积及孔隙结构特征,阐明了水的质量分数对污泥热解残渣微观孔隙结构的影响.研究显示:高温热解促使固相物质的孔隙结构充分发展,尤以2~10 nm的中孔相对数量增加显著,3.75 nm左右的孔隙所占比例出现峰值,热解残渣的孔容和BET比表面积显著增加;污泥中水的质量分数增加,污泥残渣的孔径分布更加均匀,中孔范围内的较大孔(>10 nm)增多,则其残渣作为中孔范围内吸附剂可能性越大;BET比表面积、孔容、微孔比表面积和孔容均呈现先减小后增大再减小的过程。

关键词:污水污泥;含水量;热解;孔隙结构;比表面积

The pore structure properties of wet sewage sludge residues

during a high-temperature pyrolysis

ZHENG Xiaoyan, HU Yanjun, YAN Mi, REN Jianli, ZHONG Yingjie, MENG Sheng

(Institute of Energy and Power Engineering, Zhejiang University of Technology, Hangzhou 310014, China)

Abstract:The influence of different moisture content of sewage sludge on the micro-pore structure of pyrolysis residues was investigated. Pyrolysis residue samples were prepared through the experiments of sludge pyrolysis in a lab-scale tube furnace. The mico-pore structures of the various residues were characterized by ASAP 2020 physisorption analyzer. The results showed that the pore structure was fully developed by the high-temperature pyrolysis process, especially for a significant increased amount of the pores with a diameter from 2 nm to 10 nm. And the total amount of 3.75 nm of pores reached the maximum proportion. In addition, as moisture content increased, BET surface area and pore volume increased obviously. As the moisture content increased, the more uniform the pore size distribution of pyrolysis residue was, and the number of larger pores (>10 nm) in the range of medium pores increased much more,which means that a higher moisture content of sewage sludge resulted in a larger potential for the pyrolysis residue to be reused as mesoporous adsorbent. And BET surface area, pore volume, micro-pore surface area and volume decreased firstly and then increased and decreased finally。

Keywords:sewage sludge; moisture content; pyrolysis; porous structure; specific surface area

随着污水处理产业的不断完善和发展,作为污水处理副产物的污泥产量不断增大,使得污泥处置问题日益突出.同传统的污泥处理方式相比,如焚烧、卫生填埋、填海及农用,污泥热解技术作为新型能源化清洁处理工艺,具备减容效果好、处理迅速、二次污染小,可回收产物能量等优势.污泥热解过程由一系列的物理化学反应构成,热解产物呈现多相态.由于市政污水污泥总体灰分质量分数较……

登录APP查看全文