APP下载

重塑非饱和粉质黏土抗剪强度特性试验研究

2015-02-19许四法王志健祁晓翔

浙江工业大学学报 2015年2期

许四法,王志健,胡 琦,祁晓翔

(浙江工业大学 建筑工程学院,浙江 杭州 310014)

重塑非饱和粉质黏土抗剪强度特性试验研究

许四法,王志健,胡琦,祁晓翔

(浙江工业大学 建筑工程学院,浙江 杭州 310014)

摘要:含水率对非饱和土的抗剪强度有很大影响,因此研究含水率与非饱和土抗剪强度之间的关系,具有重要的工程意义.以粉质黏土为研究对象,通过直剪和基质吸力试验,研究含水率对抗剪强度及内摩擦角和黏聚力的影响.结果表明:随着基质吸力的增大,非饱和土的抗剪强度不断增大,说明基质吸力对抗剪强度有较大贡献;随着含水率增大,土的内摩擦角减小;在含水率较小时,黏聚力增大,当含水率增加到一定值时,土的黏聚力急剧下降。

关键词:非饱和土;抗剪强度;黏聚力;内摩擦角;基质吸力

An experimental study on the shear strength characteristics

of remolded unsaturated silty clay

XU Sifa, WANG Zhijian, HU Qi, QI Xiaoxiang

(College of Civil Engineering and Architecture, Zhejiang University of Technology, Hangzhou 310014, China)

Abstract:The water content exerts a great influence on the shear strength of unsaturated clay. It is, therefore, of important practical significance to study the relationship between the water content and the shear strength of unsaturated clay. The direct shear test and the matrix suction test were adopted to investigate the effects of the water content on the shear strength, friction angle, and cohesion of silty clay. The results showed that the shear strength of unsaturated clay increases with the increase of the water content, indicating that the matrix suction has a larger contribution to the shear strength. The friction angle decreases by increasing the water content. At a low water content, cohesion increases with an increases in water content. When the water content reaches a certain value, however, cohesion drops dramatically。

Keywords:unsaturated clay; shear strength; cohesion; internal friction angle; matrix suction

土的抗剪强度除受土体的结构和种类影响以外,还与含水率与饱和度有很大关系.当土体的含水率发生变化时,其工程性质会发生很大改变,其根本原因在于基质吸力的不同。

有关非饱和土的强度特性,Fredlund[1]研究了非饱和土的渗透、强度及体变特性与土水特征曲线之间的关系,提出了双应力状态非饱和土抗剪强度公式.Vanapalli[2]在非饱和土微观分析的基础上,利用土水特征曲线建立φb与土的含水率变化之间的关系,提出了非饱和土抗剪强度的经验公式.张常光[3]认为吸附强度表达式的不同导致了非饱和土抗剪强度公式的多样性.除理论研究之外,很多……

登录APP查看全文