商住楼结构设计实践
2012-10-15孔庆玮
孔庆玮
摘要:文章主要结合工程实例,对高层住宅楼的结构设计进行了分析,在满足建筑使用要求的情况下,结构设计中也充分体现了剪力墙结构的优点,其刚度大、位移小、舒适程度高。实践证明剪力墙结构体系适用于高层住宅建筑。
关键词:高层建筑;位移角;地基基础
Abstract: the paper mainly combined with the engineering practice, the structure design of high-rise residential buildings are analyzed, and to meet the requirements of the building use, the structural design of also fully embodies the shear wall structure of the advantages, its stiffness big, small and comfortable high degree of displacement. Practice proves the shear wall structure system are used in high-rise residential buildings.
Keywords: high building; Displacement Angle; foundation
中圖分类号: TU97 文献标识码: A 文章编号:
1、工程概况
本工程总建筑面积114128m2 。1#住宅楼建筑面积22169 m2 ,地上29层,地下2层地下室。该工程建筑结构安全等级为二级,设计使用年限为50a,建筑抗震设防为丙类,抗震设防烈度为7度,地震作用和抗震措施均按抗震7烈度设防,设计基本地震加速度为0.2.g,设计地震分组为第一组,剪力墙抗震等级为二级。1#住宅楼采用现浇钢筋混凝土剪力墙结构,抗震等级为二级。
2、高宽比确定
高层建筑的高宽比,是对结构刚度、整体稳定、承载能力和经济合理性的宏观控制。根据《高层建筑混凝土结构设计规程》JGJ3-2002第4.2.3条条文解释“一般场合,可按所考虑方向的最小投影宽度计算高宽比,但对凸出建筑物平面很小的局部结构(如楼梯间、电梯间等),一般不应包含在计算宽度内。”根据规范提供的方法, 本工程高宽比超过《高层建筑混凝土结构设计规程》JGJ3-2002第4.2.3条表4.2.3-1抗震设防烈度为7度时,A级高度剪力墙结构高宽比不宜大于6的规定。因高宽比超过规范限值,因此,本工程在结构设计时应采取必要的加强措施。
3结构设计
3.1 结构选型
建筑物的结构设计,不仅要求具有足够的承载力,而且必……