现代高层建筑混凝土施工技术探析
2012-06-04张永晖
张永晖
摘 要: 混凝土工程作为现代高层建筑工程的主体工程,直接关系到高层建筑质量的好坏和安全性能。文章结合作者实际施工的某高层建筑混凝土工程阐述了高层建筑混凝土施工技术的特性, 分析了混凝土施工技术的要点,提出混凝土施工过程中应注意的问题以及技术控制措施,以保证高建筑工程施工质量。
关键词: 高层建筑; 混凝土 施工技术措施
Abstract: the concrete engineering as a modern high-rise building project of the main body of the project, are directly related to a high building the stand or fall of quality and safety performance. Combining with practical high-rise building concrete engineering expounds the concrete construction technology of the high-rise building characteristics, analyses the concrete construction technology, the main points of the concrete construction of the proposed the problems in the process and technical control measures, to ensure the construction quality tall buildings.
Keywords: high building; Concrete, construction technology, measures
中图分类号:TU97 文献标识码:A文章编号:
1 工程实例概况
湛江某工程大厦有 2 栋 26 层的高级商品办公住宅楼组成, ±0.00以上设四层裙楼, 二座塔楼, 地下室二层, 总高度为 76.80m, 建筑物结构类型为钢筋砼框剪结构, 基础采用人工挖孔桩, 主楼钢筋混凝土筏形基础承台板厚 3.00m, 平面 45.2m×45.2m,承台混凝土量为 6018.26m3。地下车库承台板厚 1.00m, 混凝土量为 2328m3, 承台混凝土强度等级为 C45, 抗渗等级 S6。
1.1 选择砼原材料
为保证大体积砼的施工质量, 原材料的选择极为重要, 对进场材料要选择, 符合各项规范要求方可使用。水泥: 选用525# 普通硅酸盐水泥并适当掺加粉煤灰。根据大体积砼的特点, 砼的强度等级一般为高标号砼, 为了降低水泥的水化热, 在满足砼质量要求的条件下, 适当外掺粉煤灰, 同时还可以减少水泥用量, 并延迟水化热高峰期的到来, 有利于砼的强度增长,避免温度应力过大而产生裂缝。碎石: 选用级配较好的花岗岩碎石, 粒径为 10~30mm, 含泥量不得大于 1% , 且不得含有有机杂质。砂: 选用级配较好的中粗砂, 含泥量不得超过 2% , 通过0.315mm 筛孔的砂不得少于 15% 。……
