PTT/MMT复合材料流变性能的研究
2011-11-04王立岩李继新相恒学
王立岩,李 光,郭 静,李继新,相恒学
(1.东华大学材料科学与工程学院,纤维材料改性国家重点实验室,上海201620;2.沈阳工业大学石油化工学院,辽宁辽阳111003;3.大连工业大学化工与材料学院,辽宁大连116034)
PTT/MMT复合材料流变性能的研究
王立岩1,2,李 光1,郭 静3,李继新2,相恒学3
(1.东华大学材料科学与工程学院,纤维材料改性国家重点实验室,上海201620;2.沈阳工业大学石油化工学院,辽宁辽阳111003;3.大连工业大学化工与材料学院,辽宁大连116034)
采用熔融共混法制备了聚对苯二甲酸丙二酯/蒙脱土(PTT/MMT)复合材料,并采用毛细管流变仪对复合材料的流变性能进行了研究。结果表明,PTT和PTT/MMT复合材料均为假塑性流体,1%~3%的MMT就可以显著改善复合材料的流动性。复合材料的非牛顿指数大于PTT,表观黏度小于PTT,流动性优于PTT,可以在较低的温度下成型加工;复合材料的黏流活化能高于PTT,更适合通过升高温度的方法来改善其流动性。
聚对苯二甲酸丙二醇酯;蒙脱土;复合材料;流变性能
Abstract:The rheological behavior of poly(trimethylene terephthalate)/montemorillonite(PTT/MMT)composites prepared by melt blending was studied using capillary rheometer.It showed that PTT and PTT/MMT melts were all pseudo-plastic fluids,and the addition of 1%~3%MMT could obviously improve the flow property of the composites.The non-Newtonian index of the composites was higher than that of PTT.The apparent viscosity of the composite was lower than that of PTT,and their flow property was better than that of PTT,so the composites could be processed at lower temperature.The viscous flow activation energy of the composite was higher than that of PTT,and it was more proper for the composite to improve their flow properties by increasing temperature.
Key words:poly(trimethylene terephthalate);montmorillonite;composite;rheological behavior
0 前言
随着科学技术的进步,人们对聚合物材料的要求日益提高,单一组分的材料已难以满足应用需要[1]。因此通过添加一些组分对现有的高分子材料进行复合改性是最简单而又行之有效的方法。PTT的性能介于聚对苯二甲酸乙二酯(PET)和聚对苯二甲酸丁二酯(PBT)之间,既具有 PET的卓越性能,又具有 PBT优良的成型加工性能[2]。但PTT也存在热稳定性差、强度不高、制品的高温尺寸稳定性差等缺点。MMT作为添加剂对提高许多聚合物材料的强度、耐热性、尺寸稳定性、阻透性等方面的效果都比较明显[3],PTT/MMT复合材料的研究现已引起了科研工作者的广泛关注。……
