现场样品抽油杆腐蚀分析和静力学仿真研究
2025-08-07李维王晓飞郭阳凯刘环宇张耀辉张鑫葛嵩麻惠杰
中图分类号:TE933.2 文献标志码:A doi:10.3969/j.issn.1001-3482.2025.04.008
StaticsSimulation of Sucker Rod Corrosion Based on Field Samples
LI Wei',WANGXiaofei²,GUOYangkai²,LIUHuanyu³,ZHANGYaohui3,ZHANGXin, GE Song4,MA Huijie5
(1.LongdongOilandGasDevelopmentBranch,PetroChinaChangqingOilfeld,Qingyang745Ooo,China;2.TelthOil ProductionPlantetroinaagqingOilfieldingyang7454o,ina;3.aleOilevelopmentranchen Changqing Oilfield,Qingyang74540o,China; 4.CNooc (China)Limited ZhanjiangBranch, Zhanjiang 5240oo,China; 5.FourthOilProductionPlant,PetroChinaDagangOilfieldBranch,Tianjin3Oo28o,China)
Abstract: The sucker rod serves as a core component of the mechanical oil extraction system in oilfields, and itsreliability directly affects the production efficiencyand safety of oil wells.Due tolong-term exposure to complex oil well environments,sucker rods are susceptible to corrosion and mechanical fatigue,leading to performance degradation and breakage. The causes of sucker rod corrosion and the mechanical behavior under working conditions were explored through field sample analysis and static mechanical simulation,providing a scientific basis for the design,material selection,and anti-corrosion measures of sucker rods. Chemical composition analysis,metallographic microstructure testing, scanning electron microscopy analysis,energy spectrum analysis,ion spectroscopy analysis,and produced fluid component analysis were conducted on the Grade D sucker rod samples (material: 2OCrMoA) colected in the field to determine the causes of corrosion.A three-dimensional simulation model of the sucker rod was constructed using SolidWorks,and static mechanical simulation was performed in Abaqus software to simulate the stress distribution and deformation of the sucker rod under actual working conditions.The study results indicate that the main causes of sucker rod corrosion are oxygen corrosion and hydrogen sulfide corrosion caused by high concentrations of chloride ions,dissolved oxygen in water,and hydrogen sulfide.Static mechanical simulation reveals the distribution of maximum principal stress in the sucker rod under working conditions,as wellas stressconcentration in the root area of the threads,the transition area at the base ofthe shoulder,the position where the wrench is applied,and the rod body near the upsetting flange.The simulation results also show that the axial deformation of the sucker rod is controlld within a safe range,verifying the rationality of the design.The corrosion control and maintenance of the sucker rod provide a scientific basis,which is of great engineering application value for guiding the design and material selection of sucker rods.
Key words:sucker rod; corrosionanalysis; static mechanical simulation; field sample; threaded conection
抽油杆长期处于恶劣环境中,腐蚀和断裂问题突出,严重影响了油井的正常生产和作业安全[-4]。抽油杆的腐蚀不仅会导致材料损失、设备损坏,还可能引发环境污染和安全事故,深入研究抽油杆的腐蚀机理及其防护措施具有重要意义[5-6]
随着油田开发的深入,抽油杆的腐蚀问题已成为制约油田高效开发的关键因素。通过对抽油杆腐蚀原因的分析和静力学仿真研究,可为抽油杆的设计、选材、防腐措施提供科学依据,延长抽油杆的使用寿命,降低油田维护成本,提高油田经济效益[79]。静力学仿真作为一种有效的预测工具,可以模拟抽油杆在实际工作条件下的受力情况,预测其疲劳寿命,为抽油杆的安全运行提供保障[10-15]
国内外学者对抽油杆的腐蚀问题进行了广泛研究。国外研究主要集中在材料性能改进、腐蚀机理分析和防腐涂层技术等方面[13-15]。国内研究则更侧重于抽油杆腐蚀原因分析、腐蚀监测技术和防腐措施的应用[2-4]。近年来,随着计算技术的发展,有限元分析方法被广泛应用于抽油杆的静力学仿真研究中,通过模拟抽油杆在复杂工况下的受力情况,为抽油杆的设计和优化提供了新的思路[16-18]。针对特定油田环境下抽油杆腐蚀与静力学性能的综合研究仍相对不足,特别是在现场样品腐蚀分析和静力学仿真相结合的研究领域,尚有较大的探索空间[19-21]。
本文以现场取回的材料为20CrMoA的D级抽油杆样品及采出液为研究对象,综合运用化学成分分析、金相显微组织检测、扫描电镜分析等方法,分析抽油杆的腐蚀原因,并探讨其腐蚀机理。……
