基于非支配遗传算法-Ⅱ的放大电路分立元件自动参数优化方法
2025-08-03张佳薇林舒杨莫冲顾伟宏冷欣余佩龙马勤波黄建平
中图分类号:S778 文献标识码:A DOI:10.7525/j.issn.1006-8023.2025.04.018
Abstract:Theamplification circuit represents apivotalcomponent withinthe domainof forestry intelligent equipment, with its functionality exertinga direct influenceonthe eficacywith which weak signalsaremonitored within forestry monitorngapplications.High-performance discrete amplification circuits are complex in structure,andthe traditional manual selectionof discretecomponent parameters inanalogue circuits is ineffcientand dificult to meettherequirementsoflow noiseand high stabilityin fieldssuch as forest firemonitoringand wood defectdetection.The purposeof this paperis to propose anautomaticparameteroptimization methodfordiscretecomponents in circuitsbasedon the nondominated sorting genetic algorithmII(NSGA-I).Firstly,a parameter optimization model of the amplifier circuit is established,and design indicatorsare proposed inaccordance with therequirements.Next,NSGA-IIisused to solve the circuit parameters.Finally,theoptimization results are verified by comparing NSGA-II with manual methods,particleswarmalgorithms,vortexsearchalgorithmsand geneticalgorithms through simulationand physical testing of circuit boards.The experimental findings demonstrate that the NSGA-IIcircuit parameteroptimization method proposed in this study exhibits asubstantialsuperiorityover manual approaches interms of circuit performance.Incomparison with classical single-bjectiveoptimization,italsopossessesadvantagesintermsofconvergencespeedandoptimizationstability This method provides an eficient solution forthedesign of high-precision amplification circuits for forestry sensors,and it can be expanded to encompass the design optimization of other forestry equipment circuits in the future. Keywords:Amplification circuit; parameter optimization; circuit optimization design; NSGA-II algorithm;sensor
0 引言
放大电路是现代电子设备体系中的重要组成部分,其主要功能是对微弱电信号进行放大使其可以达到后端负载的驱动要求或者测量电路的接收阈值]。实际应用中,被探测的温度、湿度、红外和烟雾等信号经过传感器被转换为电信号[2]。然而被转换的电信号往往极其微弱,无法达到后端信号处理部分的最低阈值,此时就需要放大电路增强信号的幅度,使得微弱信号能够被进一步处理。放大电路是林业智能装备系统中的重要组成部分,具有高性能放大电路的各类传感器在林火检测、木材探伤与植物信号检测等领域都发挥着极为关键的作用[3-6]。
在森林火灾监测中,传感器被布置在固定或者便携式的探测设备中组成物联网系统[7-8],这些传感器需要实时采集到微弱的烟雾、火焰以及气温变化等信号[9-11]。微弱信号放大电路自身引人的低频噪声将影响信号质量进而影响测试的灵敏度,因此需要放大电路具有高稳定性和较低的低频噪声[12]。除林火监测外,木材信号测量领域的传感器中也需要使用高性能放大电路。对于木材的无损检测,目前主流方案的应力波方法得到的微小电荷信号[13]、电阻抗成像技术得到的边界电压电桥信号[14]等均需要对信号进行放大后,通过模数转换电路为数字信号进行处理。电桥与锁相放大器除要求对放大电路具有低噪声与高稳定性外,还提出了削减不需要干扰信号与电路具备一定带载能力的要求。……
