新能源汽车三电系统功能安全技术要点分析
2025-07-13张治国
中图分类号:U469.72 文献标识码:A 文章编号:1003-8639(2025)06-0021-0:
AnalysisofKey TechnicalPointsforFunctional Safetyofthe Three-electricity SystemsinNewEnergyVehicles
Zhang Zhiguo
(NIO Automotive Technology(Anhui)Co.,Ltd.,Hefei 230031,China)
【Abstract】With the development of new energy vehiclesand the implementation of thenational standard GB/T 34590—2024,this article focuses on the functional safetyof the three-electricity systemand uses HAZOP and FMEA to clarifythefailuremodesandASILsafetyobjectives.Intermsofhardware,thebatteryadoptshigh-precisionsensorsand multi-layer protection.The motorand electroniccontrol implementredundancyof keycomponentsandadopta \"dual power supply + dual communication+dual controller\"architecture.At the software level,security is guaranteed by state machines,fusionalgorithmsand multi-level circuit breakers.Taking a certain pure electriccommercial vehicleasan example,practical verification shows thatthe sensor redundancy design can significantlyreduce the failurerate from1.2× 10-4/h to 3.5×10-7/h ,meeting the ASIL-B safety level standard.
【Key words】new energy vehicles;three-electricity system;battery protection;hardware security;sensor redundancy
0 引言
2024年在政策、技术与环保意识驱动下,全球新能源汽车市场蓬勃发展。为应对安全挑战,GB/T34590—2024国标全面实施,该标准契合新能源汽车三电系统特性,对其全生命周期提出严苛要求。三电系统功能安全关乎车辆运行与乘员安全,剖析其技术要点,顺应产业规范趋势,也为解决工程问题提供理论支撑。
1电池系统功能安全分析
1.1功能安全需求与危害分析
电池系统功能安全致力于防控过充、过放、过热及短路等极端工况风险。运用危险与可操作性分析(Hazardand OperabilityStudy,HAZOP),系统性剖析电池管理系统BMS在信号采集、逻辑控制与能量调度中的潜在偏差,精准识别电压/电流超限、温度异常、绝缘失效等危害事件;借助失效模式与影响分析(FailureModeandEffectsAnalysis,FMEA),量化评估电池单体、模组及传感器等部件的失效模式,如单体过充引发析锂短路、传感器失效导致保护延迟,通过ASIL-B/C/D风险等级划分明确安全目标。
1.2 硬件设计关键技术
电池管理系统BMS硬件架构构建多层防护体系。高精度传感器确保电压采集误差 ⩽±5mV 、温度分辨率 ⩽±0.5∘C ,搭配24位ADC实现电芯状态精准监测;磁耦合或光耦隔离技术将信号传输共模抑制比提升至100dB以上,隔绝电磁干扰;冗余DC-DC转换器与超级电容备份电源,保障主电源失效时30s安全停机。
1.3软件策略与安全机制
电池系统软件通过状态机管理,划分为正常运行、预警、故障、安全停机4级状态。基于安时积分与卡尔曼滤波融合算法,实现电池荷电状态SOC与健康状态SOH的精准估算。……
