APP下载

基于机器学习的通信电缆故障检测与定位方法

2024-04-13黄艺航蔡凯武黄晓智袁澄梁恩源林智海

自动化与信息工程 2024年1期
关键词:故障信号检测

黄艺航 蔡凯武 黄晓智 袁澄 梁恩源 林智海

本文引用格式:黄艺航,蔡凯武,黄晓智,等.基于机器学习的通信电缆故障检测与定位方法[J].自动化与信息工程, 2024,45(1):  35-41;60.

HUANG Yihang, CAI Kaiwu, HUANG Xiaozhi, et. al. Fault detection and localization method of communication cables based on machine learning[J]. Automation & Information Engineering, 2024,45(1):35-41;60.

摘要:为解决传统的通信电缆故障检测与定位方法存在的灵敏性不足和智能化程度低等问题,提出基于机器学习的通信电缆故障检测与定位方法。首先,基于行波法检测原理搭建通信电缆故障仿真模型来采集实验数据样本;然后,提出基于粒子群优化-支持向量机(PSO-SVM)的通信电缆故障检测模型,其故障识别准确率达99.4%;接着,提出基于卷积神经网络-长短时记忆(CNN-LSTM)的通信电缆故障定位模型,该模型对故障点定位的平均绝对误差为0.334 9,均方根误差为0.320 8;最后,通过对比实验验证CNN-LSTM的网络准确率较单独使用CNN和LSTM模型分别提高了9.47%和6.2%。

关键词:PSO-SVM模型;CNN-LSTM模型;行波法;通信电缆;故障检测;故障定位

中图分类号:TN391.4            文献标志码:A          文章编号:1674-2605(2024)01-0006-08

DOI:10.3969/j.issn.1674-2605.2024.01.006

Fault Detection and Localization Method of Communication Cables      Based on Machine Learning

HUANG Yihang1  CAI Kaiwu2  HUANG Xiaozhi1  YUAN Cheng1

LIANG Enyuan1  LIN Zhihai1

(1.School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China

2.School of Advanced Manufacturing, Guangdong University of Technology, Jieyang, 522000, China)

Abstract: To address the issues of insufficient sensitivity and low intelligence in traditional communication cable fault detection and localization methods, a fault detection and localization method of communication cables based on machine learning is proposed. Firstly, based on the principle of traveling wave detection, a communication cable fault simulation model is constructed to collect experimental data samples; Then, a communication cable fault detection model based on Particle Swarm Optimization Support Vector Machine (PSO-SVM) is proposed, with a fault recognition accuracy of 99.4%; Next, a communication cable fault location model based on Convolutional Neural Network Long Short Term Memory (CNN-LSTM) is proposed. The average absolute error of the model for fault location is 0.334 9, and the root mean square error is 0.320 8; Finally, through comparative experiments, it was verified that the network accuracy of CNN-LSTM was 9.47% and 6.2% higher than that of using CNN and LSTM models alone, respectively.

Keywords: PSO-SVM model; CNN-LSTM model; traveling wave method; communication cable; fault detection; fault localization

0 引言

隨着信息社会的进步,通信电缆作为信息传输的

主要媒介,其稳定性和可靠性非常重要。然而,许多

因素可能导致通信电缆出现故障,如机械损伤、断线、

接头故障、绝缘老化、水淹和电磁干扰等,从而产生通信中断、数据传输错误或网络拥堵等问题。因此,通信电缆故障检测与定位具有重要意义。

传统的通信电缆故障检测与定位方法可分为阻

抗法和行波法。其中,阻抗法通过通信电缆的电流、电压、故障距离来确定故障的类型和位置;行波法基于行波放射理论,向通信电缆发射脉冲,通过反射脉冲波的极性和时间来进行故障的定性与定位[1-2]。……

登录APP查看全文

猜你喜欢

故障信号检测
信号
完形填空二则
故障一点通
基于FPGA的多功能信号发生器的设计
奔驰R320车ABS、ESP故障灯异常点亮
小波变换在PCB缺陷检测中的应用
基于LabVIEW的力加载信号采集与PID控制
故障一点通
江淮车故障3例