铁路建设轨枕用高性能复合材料的制备与应用研究
2022-06-21任泽
任泽








摘要:采用薄膜层叠模压成型工艺制备铁路建设轨枕用高性能碳纤维织物/聚碳酸酯复合材料,研究模压温度、模压压力和模压时间对复合材料宏观形貌、拉伸性能和冲击性能的影响。结果表明,从碳纤维/聚碳酸脂复合材料的宏观形貌上看,模压温度、模压压力和模压时间分别应该控制在245 ℃及以下、6 MPa及以下和10 min及以下;从碳纤维/聚碳酸酯复合材料的力学性能上看,轨枕用高性能复合材料的最佳制备工艺:模压温度245℃、模压压力6 MPa、模压时间10 min,复合材料的0°、45°拉伸强度分别为377、99 MPa,冲击功为1.36 J。
关键词:轨枕;复合材料;成型参数;性能
中图分类号:TQ320.662;TB332
文献标识码:A文章编号:10015922(2022)06005504
Preparation and application of high performance composites for railway construction sleepers
REN Ze
(Xinjiang Railway Survey and Design Institute Co., Ltd., Urumqi, 830011, China
)
Abstract:High performance carbon fiber fabric/polycarbonate composites for railway sleepers were prepared by film lamination molding process. The effects of molding temperature, molding pressure and molding time on the macro morphology, tensile properties and impact properties of the composites were studied. The results showed that from the macro morphology of carbon fiber/polycarbonate composites, the molding temperature should be controlled at 245 ℃ and below, the molding pressure should be controlled at 6 MPa and below, while the molding time should be controlled at 10 min and below. From the mechanical properties of carbon fiber/polycarbonate composites, the best preparation process of high-performance composites for sleepers was as follows: molding temperature 245 ℃, molding pressure 6 MPa, molding time 10 min, and 0 tensile strength and 45 tensile strength for the composite was 377 MPa and 99 MPa respectively, while the impact energy was 1.36 J.
Key words:sleeper; compound material; forming parameters; performance
隨着中国经济的快速发展和科学技术的不断进步,贯穿中国全境的铁路建设无论是在数量上还是在装备水平上都处于世界前列。这不仅体现出了较高的铁路装备水平,也充分体现了相关配套材料的升级进步[1]。以铁路建设轨枕为例,由于轨枕不仅要支撑钢轨,确保钢轨的位置,又需要将钢轨传递来的能量传递给道床,因此,轨枕不仅需要一定的强度,还需要具有足够的弹性和柔韧性[2]。尤其是近年来铁路运输速度不断提高,给铁路建设轨枕提出了更好的性能要求;碳纤维/聚碳酸酯复合材料以其耐高温、稳定性好、刚度大且抗疲劳性能优异等特点而成为现代化轨枕材质的首选[3]。将聚碳酸酯与碳纤维复合制备而成的复合材料虽然具有较多的优点,但应用于轨枕的高性能复合材料开发工艺还存在较多的尚未解决的技术难题[4],如成型工艺及其工艺参数对复合材料的宏观形貌和力学性能的作用机理还不清楚[5-7]。……
